8T0907115A original ECU files
4 original (stock) ECU files with the part number 8T0907115A — Bosch MED17.5, Bosch MED17, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8T0907115A files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8T0907115A 0005 Audi A51.8 16v TFSI 170hp · CABD | Bosch MED17.5 | 8T0907115A | 0005 | 8T0907115A 0005 | €20 · Open |
| 8T0907115A 0003 Audi A51.8 170hp · CABD | Bosch MED17.5 | — | — | 8T0907115A 0003 | €20 · Open |
| 8T0907115A 0004 Audi A51.8 170hp · CABDMap pack · 118 maps | Bosch MED17.5 | — | — | 8T0907115A 0004 | €20 · OpenWith maps €60 |
| 0261201963 1037394367 Audi A51.8 170hp · CABD | Bosch MED17 | 0261201963 | 1037394367 | 8T0907115A 0004 | €20 · Open |
No file in this list matches. Search all original files →
About 8T0907115A
8T0907115A is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 3 files and as the hardware number on 1 file.
They were read from Bosch MED17.5 (3 files) and Bosch MED17 (1 file) control units.
Our catalogue lists them for the Audi A5 (1.8 16v TFSI 170hp).
Other numbers on these files: 1 hardware number (0261201963), listed on 1 of the 4 files; 1 software number (1037394367), listed on 1 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8T0907115A
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 8T0 907 115 A
ECU types with 8T0907115A 2
Vehicles with 8T0907115A 1
More Bosch MED17.5 numbers 24
Tuning for 8T0907115A — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8T0907115A listed for?
In our catalogue: Audi A5 (1.8 16v TFSI 170hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8T0907115A?
In our catalogue 8T0907115A is on files read from Bosch MED17.5 (3 files) and Bosch MED17 (1 file) control units.
There are several 8T0907115A files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.