Part number · 3 files

8P1907115B original ECU files

3 original (stock) ECU files with the part number 8P1907115B — Bosch MED17.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

3files
1ECU types
1models
1makes

All 8P1907115B files 3

VehicleECUHWSWCalibration / upgrade
8P1907115B 0060 Audi A31.8 16v TFSI 160hp · A4.9.6 Bosch MED17.5 — — 8P1907115B 0060 €20 · Open
8P1907115B 0080 Audi A31.8 16v TFSI 160hp · A5.0.6 Bosch MED17.5 — — 8P1907115B 0080 €20 · Open
0261201598 1037387463 Audi A31.8 16v TFSI 160hp · A5.0.6Map pack · 55 maps Bosch MED17.5 0261201598 1037387463 8P1907115B 0070 €20 · OpenWith maps €60

About 8P1907115B

8P1907115B is on 3 original (stock) ECU files in our catalogue: as the SW upgrade number on 3 files and as the calibration on 3 files.

They were read from Bosch MED17.5 (3 files) control units.

Our catalogue lists them for the Audi A3 (1.8 16v TFSI 160hp).

Other numbers on these files: 1 hardware number (0261201598), listed on 1 of the 3 files; 1 software number (1037387463), listed on 1 of the 3 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8P1907115B
Files
3
Found as
SW upgrade number and calibration
ECU types
1
Vehicles
1
Also written as
8P1 907 115 B

ECU types with 8P1907115B 1

Vehicles with 8P1907115B 1

More Bosch MED17.5 numbers 24

Need a modified file?

Tuning for Bosch MED17.5 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8P1907115B listed for?

In our catalogue: Audi A3 (1.8 16v TFSI 160hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8P1907115B?

In our catalogue 8P1907115B is on files read from Bosch MED17.5 (3 files) control units.

There are several 8P1907115B files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.