Part number · 3 files

8P7907115M original ECU files

3 original (stock) ECU files with the part number 8P7907115M — Bosch MED17.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

3files
1ECU types
2models
1makes

All 8P7907115M files 3

VehicleECUHWSWCalibration / upgrade
0261S05878 1037504596 Audi A31.8 160hp · CDAA Bosch MED17.5 0261S05878 1037504596 8P7907115M 0020 €20 · Open
0261S05878 1037521148 Audi A31.8 16v TFSI 160hp · CDAA Bosch MED17.5 0261S05878 1037521148 8P7907115M 0050 €20 · Open
8P7907115M 0030 Audi TT1.8 160hp · CDAA Bosch MED17.5 — — 8P7907115M 0030 €20 · Open

About 8P7907115M

8P7907115M is on 3 original (stock) ECU files in our catalogue: as the SW upgrade number on 3 files and as the calibration on 3 files.

They were read from Bosch MED17.5 (3 files) control units.

Our catalogue lists them for the Audi A3 (1.8 16v TFSI 160hp) and Audi TT (1.8 160hp).

Other numbers on these files: 1 hardware number (0261S05878), listed on 2 of the 3 files; 2 software numbers (1037504596, 1037521148), listed on 2 of the 3 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8P7907115M
Files
3
Found as
SW upgrade number and calibration
ECU types
1
Vehicles
2
Also written as
8P7 907 115 M

ECU types with 8P7907115M 1

Vehicles with 8P7907115M 2

More Bosch MED17.5 numbers 24

Need a modified file?

Tuning for Bosch MED17.5 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8P7907115M listed for?

In our catalogue: Audi A3 (1.8 16v TFSI 160hp) and Audi TT (1.8 160hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8P7907115M?

In our catalogue 8P7907115M is on files read from Bosch MED17.5 (3 files) control units.

There are several 8P7907115M files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.