8K1907115B original ECU files
3 original (stock) ECU files with the hardware number 8K1907115B — Bosch MED17.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8K1907115B files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8K1907115B 0001 Audi A41.8 120hp · CABAMap pack · 119 maps | Bosch MED17.5 | — | 1037394389 | 8K1907115B 0001 | €20 · OpenWith maps €60 |
| 8K1907115B 0001 Audi A51.8 170hp · CABA | Bosch MED17.5 | 8K1907115B | 0001 | 8K1907115B 0001 | €20 · Open |
| 8K1907115B 0002 Audi A51.8 170hp · CABA | Bosch MED17.5 | 8K1907115B | 0002 | 8K1907115B 0002 | €20 · Open |
No file in this list matches. Search all original files →
About 8K1907115B
8K1907115B is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files, as the SW upgrade number on 3 files and as the hardware number on 2 files.
They were read from Bosch MED17.5 (3 files) control units.
Our catalogue lists them for the Audi A5 (1.8 170hp) and Audi A4 (1.8 120hp).
Other numbers on these files: 1 software number (1037394389), listed on 1 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8K1907115B
- Files
- 3
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 8K1 907 115 B
ECU types with 8K1907115B 1
Vehicles with 8K1907115B 2
Tuning for Bosch MED17.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8K1907115B listed for?
In our catalogue: Audi A5 (1.8 170hp) and Audi A4 (1.8 120hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8K1907115B?
In our catalogue 8K1907115B is on files read from Bosch MED17.5 (3 files) control units.
There are several 8K1907115B files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.