8P0907115BA original ECU files
3 original (stock) ECU files with the part number 8P0907115BA — Bosch MED17.5, used in Audi, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8P0907115BA files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8P0907115BA 0010 Audi A32.0 200hp · CCZA | Bosch MED17.5 | — | — | 8P0907115BA 0010 | €20 · Open |
| 8P0907115BA 0020 Audi A32.0 200hp · CCZA | Bosch MED17.5 | — | — | 8P0907115BA 0020 | €20 · Open |
| 0261S05623 1037504329 Volkswagen EOS2.0 200hp · CCZA | Bosch MED17.5 | 0261S05623 | 1037504329 | 8P0907115BA 0010 | €20 · Open |
No file in this list matches. Search all original files →
About 8P0907115BA
8P0907115BA is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the SW upgrade number on 3 files.
They were read from Bosch MED17.5 (3 files) control units.
Our catalogue lists them for the Audi A3 (2.0 200hp) and Volkswagen EOS (2.0 200hp).
Other numbers on these files: 1 hardware number (0261S05623), listed on 1 of the 3 files; 1 software number (1037504329), listed on 1 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8P0907115BA
- Files
- 3
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 8P0 907 115 BA
ECU types with 8P0907115BA 1
Vehicles with 8P0907115BA 2
Tuning for Bosch MED17.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8P0907115BA listed for?
In our catalogue: Audi A3 (2.0 200hp) and Volkswagen EOS (2.0 200hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8P0907115BA?
In our catalogue 8P0907115BA is on files read from Bosch MED17.5 (3 files) control units.
There are several 8P0907115BA files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.