Part number · 5 files

8P0907115A original ECU files

5 original (stock) ECU files with the part number 8P0907115A — Bosch MED9.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
2models
1makes

All 8P0907115A files 5

VehicleECUHWSWCalibration / upgrade
0261S02075 1037374304 Audi A32.0 16v TFSI 200hp Bosch MED9.1 0261S02075 1037374304 8P0907115A 0100 €20 · Open
0261S02075 1037375747 Audi A32.0 200hp Bosch MED9.1 0261S02075 1037375747 8P0907115A 0130 €20 · Open
0261S02075 1037377865 Audi A32.0 200hp Bosch MED9.1 0261S02075 1037377865 8P0907115A 0140 €20 · Open
0261S02075 1037387579 Audi A32.0 200hpMap pack · 129 maps Bosch MED9.1 0261S02075 1037387579 8P0907115A 0150 €20 · OpenWith maps €60
8P0907115A 0010 Audi S32.0 256hp · CDLCMap pack · 66 maps Bosch MED9.1 8P0907115A 0010 8P0907115A 0010 €20 · OpenWith maps €60

About 8P0907115A

8P0907115A is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 4 files and as the hardware number on 1 file.

They were read from Bosch MED9.1 (5 files) control units.

Our catalogue lists them for the Audi A3 (2.0 16v TFSI 200hp) and Audi S3 (2.0 256hp).

Other numbers on these files: 1 hardware number (0261S02075), listed on 4 of the 5 files; 4 software numbers (1037374304, 1037375747, 1037377865, 1037387579), listed on 4 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8P0907115A
Files
5
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
8P0 907 115 A

ECU types with 8P0907115A 1

Vehicles with 8P0907115A 2

More Bosch MED9.1 numbers 24

Need a modified file?

Tuning for Bosch MED9.1 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8P0907115A listed for?

In our catalogue: Audi A3 (2.0 16v TFSI 200hp) and Audi S3 (2.0 256hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8P0907115A?

In our catalogue 8P0907115A is on files read from Bosch MED9.1 (5 files) control units.

There are several 8P0907115A files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.