8E1910560 original ECU files
4 original (stock) ECU files with the hardware number 8E1910560 — Bosch MED9.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8E1910560 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8E1910560 0040 Audi RS44.2 420hp · BNSMap pack · 66 maps | Bosch MED9.1 | 8E1910560 | 0040 | 8E1910560 0040 | €20 · OpenWith maps €60 |
| 0261S02165 1037381965 Audi RS44.2 420hp | Bosch MED9.1 | 0261S02165 | 1037381965 | 8E1910560 0050 | €20 · Open |
| 0261S02165 1037394852 Audi RS44.2 420hp | Bosch MED9.1 | 0261S02165 | 1037394852 | 8E1910560 0090 | €20 · Open |
| 8E1910560 0020 Audi RS44.2 V8 32v FSI 420hp · BNS | Bosch MED9.1 | 8E1910560 | 0020 | 8E1910560 0020 | €20 · Open |
No file in this list matches. Search all original files →
About 8E1910560
8E1910560 is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the hardware number on 2 files and as the SW upgrade number on 2 files.
They were read from Bosch MED9.1 (4 files) control units.
Our catalogue lists them for the Audi RS4 (4.2 V8 32v FSI 420hp).
Other numbers on these files: 1 hardware number (0261S02165), listed on 2 of the 4 files; 2 software numbers (1037381965, 1037394852), listed on 2 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8E1910560
- Files
- 4
- Found as
- calibration, hardware number and SW upgrade number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 8E1 910 560
ECU types with 8E1910560 1
Vehicles with 8E1910560 1
Tuning for Bosch MED9.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8E1910560 listed for?
In our catalogue: Audi RS4 (4.2 V8 32v FSI 420hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8E1910560?
In our catalogue 8E1910560 is on files read from Bosch MED9.1 (4 files) control units.
There are several 8E1910560 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.