8P0907115A 0010 Bosch MED9.1 WinOLS mappack
Audi S3 · CDLC
- One ZIP by e-mail: the original .bin + the .csv mappack for WinOLS — it imports just like a .kp map pack
- Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values
- Every map of the export is included — each map's name is listed below
- Axes checked against this exact original for all 66 maps
- No account — your e-mail and a card
- Check the HW / SW above against your read — all sales are final
E-mailed usually within a minute · your card is charged only when the ZIP is ready
Turbo System 23 maps
- Correction of impulsive turbo pressure f(IAT) 3 maps
- Correction of slow incremental factor of turbo pressure
- Correction of steady turbo pressure f(IAT) 3 maps
- Correction of turbo pressure f(IAT) 3 maps
- Fast reduction factor of turbo pressure
- Limiter of Turbo pressure
- Limiter of Turbo pressure f(APS)
- Limiter of impulsive turbo pressure 3 maps
- Limiter of steady turbo pressure 3 maps
- Linearization of impulsive turbo pressure
- Slow incremental factor of turbo pressure
- Turbo pressure 2 maps
Limiters 11 maps
- Maximum speed of vehicle 5 maps
- RPM Limiter 4 maps
- RPM limiter (higher threshold) 2 maps
Injection System 10 maps
- Injection base map
- Limiter of Lambda A 3 maps
- Limiter of Lambda B 3 maps
- Requested Lambda 3 maps
Engine Torque 9 maps
- Desired torque at wheel
- Limiter of Maximum torque
- Optimal engine torque
- Torque request during take off condition - Fifth Gear
- Torque request during take off condition - First Gear
- Torque request during take off condition - Forth Gear
- Torque request during take off condition - Reverse Gear
- Torque request during take off condition - Second Gear
- Torque request during take off condition - Third Gear
Spark Advance 8 maps
- Spark Advance base map 2 maps
- Spark Advance correction f(ECT) 3 maps
- Spark advance correction f(Trq) 2 maps
- Spark advance during cranking
Air Control 5 maps
- Airflow mass through throttle valve
- Requested engine load
- Threshold of end limitation on throttle valve angle
- Throttle valve - operating angle
- Throttle valve f(Accelerator pedal)
Is this my file?
Compare these numbers with your ECU read: this map pack is made for this software version.
- HW
- 8P0907115A
- SW
- 0010
- CAL
- 8P0907115A 0010
- Vehicle
- Audi S3 2.0 256hp
- Engine code
- CDLC
- ECU
- Bosch MED9.1
Not your software version? Other versions on HW 8P0907115A 4
| Version | Vehicle | |
|---|---|---|
| 1037387579 | Audi A32.0 200hp | Map pack · 129 maps · €60 |
| 1037374304 | Audi A32.0 16v TFSI 200hp | Original file |
| 1037375747 | Audi A32.0 200hp | Original file |
| 1037377865 | Audi A32.0 200hp | Original file |
Example map from this packRequested Lambda · 6 × 15 · read from this very original
Requested Lambda
6 × 15 · X axis: Torque, % · Y axis: Engine speed, rpm · values in lambda
| % →rpm ↓ | 55 | 60 | 80 | 90 | 98 | 100 |
|---|---|---|---|---|---|---|
| 800 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 1000 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 1240 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 1520 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 1760 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 2000 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 2240 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 2520 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.91 |
| 3000 | 1.00 | 1.00 | 1.00 | 1.00 | 0.97 | 0.91 |
| 4000 | 1.00 | 1.00 | 1.00 | 0.94 | 0.91 | 0.91 |
| 4520 | 1.00 | 1.00 | 0.95 | 0.93 | 0.91 | 0.91 |
| 5000 | 1.00 | 1.00 | 0.93 | 0.91 | 0.91 | 0.91 |
| 5520 | 1.00 | 0.91 | 0.91 | 0.91 | 0.91 | 0.91 |
| 6000 | 1.00 | 0.91 | 0.91 | 0.91 | 0.91 | 0.91 |
| 6520 | 1.00 | 0.91 | 0.91 | 0.91 | 0.91 | 0.91 |
Swipe the table sideways to see every column.
One of 66 maps in this pack, read from this original file. Every other map is named in the list above.
What you get
What is in our map packs. Maps with correctly labelled X and Y axes in the right format and the correct factor for the data values, ready to read. Every map of the export is included, listed by category — you see each map's name before you buy.
Questions
What is a WinOLS mappack?
The definitions of the maps in one ECU software version — name, category, size, axes and position — exported from WinOLS as a CSV. It is not a DAMOS or A2L file and holds no tuned values.
Will it fit my ECU?
It is made for this software version: compare the HW / SW numbers above with your read.
Why €60?
Our map-pack prices, the original file included: cars €60 when the ECU type came out before 2012, €70 from 2012 on; motorcycles and boats €80; trucks and agricultural machinery €90.
Refunds?
All sales are final — check the numbers and the map list before you buy.
All Audi S3 map packs · All Bosch MED9.1 mappacks · This original file · Search all mappacks