8E0910115N original ECU files
4 original (stock) ECU files with the part number 8E0910115N — Bosch MED9.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8E0910115N files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0261S02211 1037386863 Audi A42.0 16V TFSI 200hp | Bosch MED9.1 | 0261S02211 | 1037386863 | 8E0910115N 0070 | €20 · Open |
| 8E0910115N 0020 Audi A42.0 16V TFSI 220hpMap pack · 47 maps | Bosch MED9.1 | 8E0910115N | 0020 | 8E0910115N 0020 | €20 · OpenWith maps €60 |
| 8E0910115N 0030 Audi A42.0 16V TFSI 220hpMap pack · 46 maps | Bosch MED9.1 | 8E0910115N | 0030 | 8E0910115N 0030 | €20 · OpenWith maps €60 |
| 0261S02211 1037386863 Audi A42.0 220hpMap pack · 148 maps | Bosch MED9.1 | 0261S02211 | 1037386863 | 8E0910115N 0070 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 8E0910115N
8E0910115N is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 2 files and as the hardware number on 2 files.
They were read from Bosch MED9.1 (4 files) control units.
Our catalogue lists them for the Audi A4 (2.0 16V TFSI 220hp, 2.0 16V TFSI 200hp).
Other numbers on these files: 1 hardware number (0261S02211), listed on 2 of the 4 files; 1 software number (1037386863), listed on 2 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8E0910115N
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 8E0 910 115 N
ECU types with 8E0910115N 1
Vehicles with 8E0910115N 1
Tuning for Bosch MED9.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8E0910115N listed for?
In our catalogue: Audi A4 (2.0 16V TFSI 220hp, 2.0 16V TFSI 200hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8E0910115N?
In our catalogue 8E0910115N is on files read from Bosch MED9.1 (4 files) control units.
There are several 8E0910115N files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.