8P0907115L original ECU files
4 original (stock) ECU files with the part number 8P0907115L — Bosch MED9.1, used in Audi, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8P0907115L files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8P0907115L 0010 Audi A32.0 200hp · BWAMap pack · 94 maps | Bosch MED9.1 | 8P0907115L | 0010 | 8P0907115L 0010 | €20 · OpenWith maps €60 |
| 0261S02340 1037386670 Audi A32.0 200hp · BWA | Bosch MED9.1 | 0261S02340 | 1037386670 | 8P0907115L 0030 | €20 · Open |
| 0261S02340 1037386858 Audi S32.0 265hp | Bosch MED9.1 | 0261S02340 | 1037386858 | 8P0907115L 0040 | €20 · Open |
| 0261S02340 1037386858 Volkswagen Vento2.0 200hp | Bosch MED9.1 | 0261S02340 | 1037386858 | 8P0907115L 0040 | €20 · Open |
No file in this list matches. Search all original files →
About 8P0907115L
8P0907115L is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 3 files and as the hardware number on 1 file.
They were read from Bosch MED9.1 (4 files) control units.
Our catalogue lists them for the Audi A3 (2.0 200hp), Audi S3 (2.0 265hp) and Volkswagen Vento (2.0 200hp).
Other numbers on these files: 1 hardware number (0261S02340), listed on 3 of the 4 files; 2 software numbers (1037386858, 1037386670), listed on 3 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8P0907115L
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 8P0 907 115 L
ECU types with 8P0907115L 1
Vehicles with 8P0907115L 3
Tuning for Bosch MED9.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8P0907115L listed for?
In our catalogue: Audi A3 (2.0 200hp), Audi S3 (2.0 265hp) and Volkswagen Vento (2.0 200hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8P0907115L?
In our catalogue 8P0907115L is on files read from Bosch MED9.1 (4 files) control units.
There are several 8P0907115L files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.