8E0910115L original ECU files
3 original (stock) ECU files with the hardware number 8E0910115L — Bosch MED9.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8E0910115L files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8E0910115L 0060 Audi A42.0 16V TFSI 180hp | Bosch MED9.1 | 8E0910115L | 0060 | 8E0910115L 0060 | €20 · Open |
| 8E0910115L 0030 Audi A42.0 16V TFSI 200hp | Bosch MED9.1 | 8E0910115L | 0030 | 8E0910115L 0030 | €20 · Open |
| 8E0910115L 0040 Audi A42.0 16V TFSI 200hpMap pack · 82 maps | Bosch MED9.1 | 8E0910115L | 0040 | 8E0910115L 0040 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 8E0910115L
8E0910115L is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the hardware number on 3 files.
They were read from Bosch MED9.1 (3 files) control units.
Our catalogue lists them for the Audi A4 (2.0 16V TFSI 200hp, 2.0 16V TFSI 180hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8E0910115L
- Files
- 3
- Found as
- calibration and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 8E0 910 115 L
ECU types with 8E0910115L 1
Vehicles with 8E0910115L 1
Tuning for Bosch MED9.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8E0910115L listed for?
In our catalogue: Audi A4 (2.0 16V TFSI 200hp, 2.0 16V TFSI 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8E0910115L?
In our catalogue 8E0910115L is on files read from Bosch MED9.1 (3 files) control units.
There are several 8E0910115L files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.