8K9927156C original ECU files
5 original (stock) ECU files with the part number 8K9927156C — Temic DL501, Temic DL501 GEN2, Temic DSG DL501, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8K9927156C files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8K9927156C 0006 Audi A43.0 240hp | Temic DL501 | — | — | 8K9927156C 0006 | €20 · Open |
| 8K9927156C 0005 Audi A53.0 240hp | Temic DL501 GEN2 | — | — | 8K9927156C 0005 | €20 · Open |
| 8K9927156C 0101 Audi A53.0 240hp · CCWA | Temic DSG DL501 | — | 001015 | 8K9927156C 0101 | €20 · Open |
| 8K9927156C 0006 Audi A63.0 333hp | Temic DL501 | — | — | 8K9927156C 0006 | €20 · Open |
| 8K9927156C 0004 Audi S53.0 240hp · CCWAMap pack · 118 maps | Temic DL501 | — | 001015 | 8K9927156C 0004 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 8K9927156C
8K9927156C is on 5 original (stock) ECU files in our catalogue: as the SW upgrade number on 5 files and as the calibration on 4 files.
They were read from Temic DL501 (3 files), Temic DL501 GEN2 (1 file) and Temic DSG DL501 (1 file) control units.
Our catalogue lists them for the Audi A5 (3.0 240hp), Audi A4 (3.0 240hp), Audi A6 (3.0 333hp) and Audi S5 (3.0 240hp).
Other numbers on these files: 1 software number (001015), listed on 2 of the 5 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8K9927156C
- Files
- 5
- Found as
- SW upgrade number and calibration
- ECU types
- 3
- Vehicles
- 4
- Also written as
- 8K9 927 156 C
ECU types with 8K9927156C 3
Vehicles with 8K9927156C 4
Tuning for 8K9927156C — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8K9927156C listed for?
In our catalogue: Audi A5 (3.0 240hp), Audi A4 (3.0 240hp), Audi A6 (3.0 333hp) and Audi S5 (3.0 240hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8K9927156C?
In our catalogue 8K9927156C is on files read from Temic DL501 (3 files), Temic DL501 GEN2 (1 file) and Temic DSG DL501 (1 file) control units.
There are several 8K9927156C files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.