Part number · 5 files

8K1927156 original ECU files

5 original (stock) ECU files with the part number 8K1927156 — Temic DSG DL501, Temic DL501 GEN2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
2ECU types
3models
1makes

All 8K1927156 files 5

VehicleECUHWSWCalibration / upgrade
0B5927156F A02196 Audi A42.0 211hp Temic DSG DL501 0B5927156F A02196 8K1927156Q €20 · Open
A02206 8K1927156Q 0009 Audi A42.0 211hp Temic DSG DL501 — A02206 8K1927156Q 0009 €20 · Open
0B5927156E A02044 Audi A42.0 221hp Temic DL501 GEN2 0B5927156E A02044 8K1927156 0003 €20 · Open
0B5927156F A02203 Audi A52.0 200hp Temic DSG DL501 0B5927156F A02203 8K1927156 €20 · Open
0B5927156F A02087 Audi A5 Sportback2.0 211hp Temic DSG DL501 0B5927156F A02087 8K1927156G 0008 €20 · Open

About 8K1927156

8K1927156 is on 5 original (stock) ECU files in our catalogue: as the SW upgrade number on 5 files and as the calibration on 1 file.

They were read from Temic DSG DL501 (4 files) and Temic DL501 GEN2 (1 file) control units.

Our catalogue lists them for the Audi A4 (2.0 211hp, 2.0 221hp), Audi A5 (2.0 200hp) and Audi A5 Sportback (2.0 211hp).

Other numbers on these files: 2 hardware numbers (0B5927156F, 0B5927156E), listed on 4 of the 5 files; 5 software numbers (A02196, A02206, A02044, A02203, …).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8K1927156
Files
5
Found as
SW upgrade number and calibration
ECU types
2
Vehicles
3
Also written as
8K1 927 156 · 8K1927156

ECU types with 8K1927156 2

Vehicles with 8K1927156 3

Need a modified file?

Tuning for 8K1927156 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8K1927156 listed for?

In our catalogue: Audi A4 (2.0 211hp, 2.0 221hp), Audi A5 (2.0 200hp) and Audi A5 Sportback (2.0 211hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8K1927156?

In our catalogue 8K1927156 is on files read from Temic DSG DL501 (4 files) and Temic DL501 GEN2 (1 file) control units.

There are several 8K1927156 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.