0B5927156D original ECU files
6 original (stock) ECU files with the hardware number 0B5927156D — Temic DL501, Temic DL501 GEN2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0B5927156D files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| A02203 8R0927156K 0017 Audi A52.0 200hp | Temic DL501 GEN2 | 0B5927156D | A02203 | 8R0927156K 0017 | €20 · Open |
| A02044 8R0927156K 0006 Audi Q52.0 177hp | Temic DL501 GEN2 | 0B5927156D | A02044 | 8R0927156K 0006 | €20 · Open |
| A02044 8K0927156H 0009 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156D | A02044 | 8K0927156H 0009 | €20 · Open |
| A02044 8R0927156C 0020 Audi S43.0 333hp | Temic DL501 | 0B5927156D | A02044 | 8R0927156C 0020 | €20 · Open |
| A02044 8R0927156D 0009 Audi S43.0 333hp | Temic DL501 | 0B5927156D | A02044 | 8R0927156D 0009 | €20 · Open |
| A02203 8K0927156H 0016 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156D | A02203 | 8K0927156H 0016 | €20 · Open |
No file in this list matches. Search all original files →
About 0B5927156D
0B5927156D is on 6 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Temic DL501 (4 files) and Temic DL501 GEN2 (2 files) control units.
Our catalogue lists them for the Audi S4 (3.0 333hp), Audi A5 (2.0 200hp) and Audi Q5 (2.0 177hp).
Other numbers on these files: 2 software numbers (A02044, A02203); 6 calibration / SW upgrade numbers (8R0927156K_0017, 8R0927156K_0006, 8K0927156H_0009, 8R0927156C_0020, …).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0B5927156D
- Files
- 6
- Found as
- hardware number
- ECU types
- 2
- Vehicles
- 3
- Also written as
- 0B5 927 156 D
ECU types with 0B5927156D 2
Vehicles with 0B5927156D 3
Tuning for 0B5927156D — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0B5927156D listed for?
In our catalogue: Audi S4 (3.0 333hp), Audi A5 (2.0 200hp) and Audi Q5 (2.0 177hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0B5927156D?
In our catalogue 0B5927156D is on files read from Temic DL501 (4 files) and Temic DL501 GEN2 (2 files) control units.
There are several 0B5927156D files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.