Part number · 5 files

8K5907551D original ECU files

5 original (stock) ECU files with the part number 8K5907551D — Siemens SIMOS 8.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
4models
1makes

All 8K5907551D files 5

VehicleECUHWSWCalibration / upgrade
650S855584 S8500D7000000111 Audi A53.0 272hp · CALAMap pack · 30 maps Siemens SIMOS 8.5 650S855584 S8500D7000000111 8K5907551D 0001 €20 · OpenWith maps €60
8K5907551D 0005 Audi Q53.0 272hp Siemens SIMOS 8.5 8K5907551D 0005 8K5907551D 0005 €20 · Open
8K5907551D 0003 Audi S43.0 333hp Siemens SIMOS 8.5 — — 8K5907551D 0003 €20 · Open
8K5907551D 0004 Audi S43.0 333hp Siemens SIMOS 8.5 — — 8K5907551D 0004 €20 · Open
8K5907551D 0002 Audi S53.0 333hpMap pack · 108 maps Siemens SIMOS 8.5 — — 8K5907551D 0002 €20 · OpenWith maps €60

About 8K5907551D

8K5907551D is on 5 original (stock) ECU files in our catalogue: as the SW upgrade number on 5 files, as the calibration on 5 files and as the hardware number on 1 file.

They were read from Siemens SIMOS 8.5 (5 files) control units.

Our catalogue lists them for the Audi S4 (3.0 333hp), Audi A5 (3.0 272hp), Audi Q5 (3.0 272hp) and Audi S5 (3.0 333hp).

Other numbers on these files: 1 hardware number (650S855584), listed on 1 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8K5907551D
Files
5
Found as
SW upgrade number, calibration and hardware number
ECU types
1
Vehicles
4
Also written as
8K5 907 551 D

ECU types with 8K5907551D 1

Vehicles with 8K5907551D 4

More Siemens SIMOS 8.5 numbers 18

Need a modified file?

Tuning for Siemens SIMOS 8.5 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8K5907551D listed for?

In our catalogue: Audi S4 (3.0 333hp), Audi A5 (3.0 272hp), Audi Q5 (3.0 272hp) and Audi S5 (3.0 333hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8K5907551D?

In our catalogue 8K5907551D is on files read from Siemens SIMOS 8.5 (5 files) control units.

There are several 8K5907551D files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.