4G0907551A original ECU files
6 original (stock) ECU files with the hardware number 4G0907551A — Siemens SIMOS 8.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4G0907551A files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G0907551A 0005 Audi A73.0 299hpMap pack · 98 maps | Siemens SIMOS 8.5 | — | — | 4G0907551A 0005 | €20 · OpenWith maps €60 |
| 4G0907551A 0006 Audi A73.0 299hp | Siemens SIMOS 8.5 | 4G0907551A | 0006 | 4G0907551A 0006 | €20 · Open |
| 4G0907551A 0007 Audi A73.0 299hp | Siemens SIMOS 8.5 | 4G0907551A | 0007 | 4G0907551A 0007 | €20 · Open |
| 4G0907551A 0010 Audi Q53.0 272hp · CTVA | Siemens SIMOS 8.5 | — | — | 4G0907551A 0010 | €20 · Open |
| 4G0907551A 0010 Audi Q53.0 272hp | Siemens SIMOS 8.5 | 4G0907551A | 0010 | 4G0907551A 0010 | €20 · Open |
| 4G0907551A 0010 Audi S43.0 333hp | Siemens SIMOS 8.5 | — | — | 4G0907551A 0010 | €20 · Open |
No file in this list matches. Search all original files →
About 4G0907551A
4G0907551A is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files, as the SW upgrade number on 6 files and as the hardware number on 3 files.
They were read from Siemens SIMOS 8.5 (6 files) control units.
Our catalogue lists them for the Audi A7 (3.0 299hp), Audi Q5 (3.0 272hp) and Audi S4 (3.0 333hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4G0907551A
- Files
- 6
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 4G0 907 551 A
ECU types with 4G0907551A 1
Vehicles with 4G0907551A 3
Tuning for Siemens SIMOS 8.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4G0907551A listed for?
In our catalogue: Audi A7 (3.0 299hp), Audi Q5 (3.0 272hp) and Audi S4 (3.0 333hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4G0907551A?
In our catalogue 4G0907551A is on files read from Siemens SIMOS 8.5 (6 files) control units.
There are several 4G0907551A files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.