Part number · 5 files

4G0907551G original ECU files

5 original (stock) ECU files with the part number 4G0907551G — Siemens SIMOS 8.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
4models
1makes

All 4G0907551G files 5

VehicleECUHWSWCalibration / upgrade
651S855518 0003 Audi A73.0 333hp Siemens SIMOS 8.5 651S855518 — 4G0907551G 0003 €20 · Open
4G0907551G 0002 Audi A83.0 333hpMap pack · 107 maps Siemens SIMOS 8.5 — — 4G0907551G 0002 €20 · OpenWith maps €60
4G0907551G 0005 Audi Q53.0 272hp · CTVA Siemens SIMOS 8.5 — — 4G0907551G 0005 €20 · Open
4G0907551G 0005 Audi Q53.0 272hp Siemens SIMOS 8.5 — — 4G0907551G 0005 €20 · Open
4G0907551G 0004 Audi S43.0 333hp Siemens SIMOS 8.5 4G0907551G 0004 4G0907551G 0004 €20 · Open

About 4G0907551G

4G0907551G is on 5 original (stock) ECU files in our catalogue: as the SW upgrade number on 5 files, as the calibration on 5 files and as the hardware number on 1 file.

They were read from Siemens SIMOS 8.5 (5 files) control units.

Our catalogue lists them for the Audi Q5 (3.0 272hp), Audi A7 (3.0 333hp), Audi A8 (3.0 333hp) and Audi S4 (3.0 333hp).

Other numbers on these files: 1 hardware number (651S855518), listed on 1 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 2 of these files have the same numbers, ECU, vehicle and engine as another file in this list.

Number
4G0907551G
Files
5
Found as
SW upgrade number, calibration and hardware number
ECU types
1
Vehicles
4
Also written as
4G0 907 551 G

ECU types with 4G0907551G 1

Vehicles with 4G0907551G 4

More Siemens SIMOS 8.5 numbers 18

Need a modified file?

Tuning for Siemens SIMOS 8.5 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 4G0907551G listed for?

In our catalogue: Audi Q5 (3.0 272hp), Audi A7 (3.0 333hp), Audi A8 (3.0 333hp) and Audi S4 (3.0 333hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 4G0907551G?

In our catalogue 4G0907551G is on files read from Siemens SIMOS 8.5 (5 files) control units.

There are several 4G0907551G files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.