650S855599 original ECU files
2 original (stock) ECU files with the hardware number 650S855599 — Siemens SIMOS 8.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 650S855599 files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G0907551F 0003 Audi A73.0 299hp · CGWB | Siemens SIMOS 8.5 | 650S855599 | — | 4G0907551F 0003 | €20 · Open |
| 8K5907551E 0002 Audi A73.0 299hp · CGWB | Siemens SIMOS 8.5 | 650S855599 | — | 8K5907551E 0002 | €20 · Open |
No file in this list matches. Search all original files →
About 650S855599
650S855599 is on 2 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Siemens SIMOS 8.5 (2 files) control units.
Our catalogue lists them for the Audi A7 (3.0 299hp).
Other numbers on these files: 2 calibration / SW upgrade numbers (4G0907551F_0003, 8K5907551E_0002).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 650S855599
- Files
- 2
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 1
ECU types with 650S855599 1
Vehicles with 650S855599 1
Tuning for Siemens SIMOS 8.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 650S855599 listed for?
In our catalogue: Audi A7 (3.0 299hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 650S855599?
In our catalogue 650S855599 is on files read from Siemens SIMOS 8.5 (2 files) control units.
There are several 650S855599 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.