4G1927156B original ECU files
6 original (stock) ECU files with the part number 4G1927156B — Temic DL501, Temic DL501 GEN2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4G1927156B files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G1927156B 0004 Audi A42.0 211hp | Temic DL501 | — | — | 4G1927156B 0004 | €20 · Open |
| 4G1927156B 0006 Audi A42.0 211hp | Temic DL501 | — | — | 4G1927156B 0006 | €20 · Open |
| 0B5927156F A02196 Audi A42.0 211hp | Temic DL501 GEN2 | 0B5927156F | A02196 | 4G1927156B 0003 | €20 · Open |
| 4G1927156B 0001 Audi A63.0 245hpMap pack · 83 maps | Temic DL501 | — | — | 4G1927156B 0001 | €20 · OpenWith maps €60 |
| 0B5927156F A02087 Audi A63.0 245hp | Temic DL501 | 0B5927156F | A02087 | 4G1927156B 0001 | €20 · Open |
| 4G1927156B 0002 Audi S43.0 333hp | Temic DL501 | — | — | 4G1927156B 0002 | €20 · Open |
No file in this list matches. Search all original files →
About 4G1927156B
4G1927156B is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files and as the SW upgrade number on 6 files.
They were read from Temic DL501 (5 files) and Temic DL501 GEN2 (1 file) control units.
Our catalogue lists them for the Audi A4 (2.0 211hp), Audi A6 (3.0 245hp) and Audi S4 (3.0 333hp).
Other numbers on these files: 1 hardware number (0B5927156F), listed on 2 of the 6 files; 2 software numbers (A02196, A02087), listed on 2 of the 6 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4G1927156B
- Files
- 6
- Found as
- calibration and SW upgrade number
- ECU types
- 2
- Vehicles
- 3
- Also written as
- 4G1 927 156 B
ECU types with 4G1927156B 2
Vehicles with 4G1927156B 3
Tuning for 4G1927156B — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4G1927156B listed for?
In our catalogue: Audi A4 (2.0 211hp), Audi A6 (3.0 245hp) and Audi S4 (3.0 333hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4G1927156B?
In our catalogue 4G1927156B is on files read from Temic DL501 (5 files) and Temic DL501 GEN2 (1 file) control units.
There are several 4G1927156B files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.