4G0927166F original ECU files
3 original (stock) ECU files with the part number 4G0927166F — Temic DL501 GEN2, Temic DL501, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4G0927166F files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G0927166F 0006 Audi A63.0 272hp | Temic DL501 | — | — | 4G0927166F 0006 | €20 · Open |
| 4G0927166F 0006 Audi S64.0 450hp | Temic DL501 GEN2 | — | — | 4G0927166F 0006 | €20 · Open |
| 4G0927166F 0007 Audi S64.0 450hp | Temic DL501 GEN2 | — | — | 4G0927166F 0007 | €20 · Open |
No file in this list matches. Search all original files →
About 4G0927166F
4G0927166F is on 3 original (stock) ECU files in our catalogue: as the SW upgrade number on 3 files and as the calibration on 3 files.
They were read from Temic DL501 GEN2 (2 files) and Temic DL501 (1 file) control units.
Our catalogue lists them for the Audi S6 (4.0 450hp) and Audi A6 (3.0 272hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4G0927166F
- Files
- 3
- Found as
- SW upgrade number and calibration
- ECU types
- 2
- Vehicles
- 2
- Also written as
- 4G0 927 166 F
ECU types with 4G0927166F 2
Vehicles with 4G0927166F 2
More Temic DL501 numbers 24
Tuning for 4G0927166F — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4G0927166F listed for?
In our catalogue: Audi S6 (4.0 450hp) and Audi A6 (3.0 272hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4G0927166F?
In our catalogue 4G0927166F is on files read from Temic DL501 GEN2 (2 files) and Temic DL501 (1 file) control units.
There are several 4G0927166F files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.