4G0927156K original ECU files
5 original (stock) ECU files with the part number 4G0927156K — Temic DL501, Temic DL501 GEN2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4G0927156K files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0B5927156F A02203 Audi A42.0 211hpMap pack · 64 maps | Temic DL501 | 0B5927156F | A02203 | 4G0927156K 0015 | €20 · OpenWith maps €60 |
| 4G0927156K 0008 Audi A5 Sportback2.0 211hp | Temic DL501 GEN2 | — | — | 4G0927156K 0008 | €20 · Open |
| 4G0927156K 0012 Audi A63.0 245hp | Temic DL501 | — | — | 4G0927156K 0012 | €20 · Open |
| 4G0927156K 0009 Audi S43.0 333hp | Temic DL501 | — | — | 4G0927156K 0009 | €20 · Open |
| 4G0927156K 0013 Audi S43.0 333hp | Temic DL501 | — | — | 4G0927156K 0013 | €20 · Open |
No file in this list matches. Search all original files →
About 4G0927156K
4G0927156K is on 5 original (stock) ECU files in our catalogue: as the SW upgrade number on 5 files and as the calibration on 5 files.
They were read from Temic DL501 (4 files) and Temic DL501 GEN2 (1 file) control units.
Our catalogue lists them for the Audi S4 (3.0 333hp), Audi A4 (2.0 211hp), Audi A5 Sportback (2.0 211hp) and Audi A6 (3.0 245hp).
Other numbers on these files: 1 hardware number (0B5927156F), listed on 1 of the 5 files; 1 software number (A02203), listed on 1 of the 5 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4G0927156K
- Files
- 5
- Found as
- SW upgrade number and calibration
- ECU types
- 2
- Vehicles
- 4
- Also written as
- 4G0 927 156 K
ECU types with 4G0927156K 2
Vehicles with 4G0927156K 4
More Temic DL501 numbers 24
Tuning for 4G0927156K — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4G0927156K listed for?
In our catalogue: Audi S4 (3.0 333hp), Audi A4 (2.0 211hp), Audi A5 Sportback (2.0 211hp) and Audi A6 (3.0 245hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4G0927156K?
In our catalogue 4G0927156K is on files read from Temic DL501 (4 files) and Temic DL501 GEN2 (1 file) control units.
There are several 4G0927156K files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.