001025 original ECU files
3 original (stock) ECU files with the software number 001025 — Temic DL501, Temic DL501 GEN2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 001025 files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G2927156N 0005 Audi A43.0 240hp · CCWA | Temic DL501 GEN2 | — | 001025 | 4G2927156N 0005 | €20 · Open |
| 4G2927156P 0005 Audi A43.0 240hp · CCWA | Temic DL501 | — | 001025 | 4G2927156P 0005 | €20 · Open |
| 8K2927156T 0102 Audi A43.0 240hp · CCWA | Temic DL501 | — | 001025 | 8K2927156T 0009 | €20 · Open |
No file in this list matches. Search all original files →
About 001025
001025 is on 3 original (stock) ECU files in our catalogue, always as the software number.
They were read from Temic DL501 (2 files) and Temic DL501 GEN2 (1 file) control units.
Our catalogue lists them for the Audi A4 (3.0 240hp).
Other numbers on these files: 4 calibration / SW upgrade numbers (4G2927156N_0005, 4G2927156P_0005, 8K2927156T_0009, 8K2927156T_0102).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 001025
- Files
- 3
- Found as
- software number
- ECU types
- 2
- Vehicles
- 1
ECU types with 001025 2
Vehicles with 001025 1
Tuning for 001025 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 001025 listed for?
In our catalogue: Audi A4 (3.0 240hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 001025?
In our catalogue 001025 is on files read from Temic DL501 (2 files) and Temic DL501 GEN2 (1 file) control units.
There are several 001025 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.