Part number · 7 files

8W0907401E original ECU files

7 original (stock) ECU files with the part number 8W0907401E — Bosch MD1CP004, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

7files
1ECU types
4models
1makes

All 8W0907401E files 7

VehicleECUHWSWCalibration / upgrade
8W0907401E 0003 Audi A43.0 272hp Bosch MD1CP004 — — 8W0907401E 0003 €20 · Open
8W0907401E 0003 Audi A53.0 280hp Bosch MD1CP004 — — 8W0907401E 0003 €20 · Open
8W0907401E 0004 Audi A5 Sportback3.0 272hp Bosch MD1CP004 — — 8W0907401E 0004 €20 · Open
8W0907401E 0001 Audi A63.0 218hp Bosch MD1CP004 — 10SW002146 8W0907401E 0001 €20 · Open
8W0907401E 0003 Audi A63.0 272hpMap pack · 273 maps Bosch MD1CP004 — — 8W0907401E 0003 €20 · OpenWith maps €70
8W0907401E 0004 Audi A63.0 272hp Bosch MD1CP004 — — 8W0907401E 0004 €20 · Open
10SW002146 8W0907401E 0001 Audi A63.0 272hp Bosch MD1CP004 — 10SW002146 8W0907401E 0001 €20 · Open

About 8W0907401E

8W0907401E is on 7 original (stock) ECU files in our catalogue: as the calibration on 7 files and as the SW upgrade number on 6 files.

They were read from Bosch MD1CP004 (7 files) control units.

Our catalogue lists them for the Audi A6 (3.0 272hp, 3.0 218hp), Audi A4 (3.0 272hp), Audi A5 (3.0 280hp) and Audi A5 Sportback (3.0 272hp).

Other numbers on these files: 1 software number (10SW002146), listed on 2 of the 7 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8W0907401E
Files
7
Found as
calibration and SW upgrade number
ECU types
1
Vehicles
4
Also written as
8W0 907 401 E

ECU types with 8W0907401E 1

Vehicles with 8W0907401E 4

More Bosch MD1CP004 numbers 21

Need a modified file?

Tuning for Bosch MD1CP004 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8W0907401E listed for?

In our catalogue: Audi A6 (3.0 272hp, 3.0 218hp), Audi A4 (3.0 272hp), Audi A5 (3.0 280hp) and Audi A5 Sportback (3.0 272hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8W0907401E?

In our catalogue 8W0907401E is on files read from Bosch MD1CP004 (7 files) control units.

There are several 8W0907401E files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.