4K0907401K original ECU files
6 original (stock) ECU files with the part number 4K0907401K — Bosch MD1CP004, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4K0907401K files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4K0907401K 0003 Audi A43.0 232hp | Bosch MD1CP004 | — | — | 4K0907401K 0003 | €20 · Open |
| 4K0907401K 0004 Audi A43.0 232hp | Bosch MD1CP004 | — | — | 4K0907401K 0004 | €20 · Open |
| 4K0907401K 0003 Audi A63.0 286hp | Bosch MD1CP004 | — | — | 4K0907401K 0003 | €20 · Open |
| 4K0907401K 0003 Audi A63.0 286hpMap pack · 330 maps | Bosch MD1CP004 | — | 10SW034635 | 4K0907401K 0003 | €20 · OpenWith maps €70 |
| 4K0907401K 0003 Audi A73.0 232hp | Bosch MD1CP004 | — | — | 4K0907401K 0003 | €20 · Open |
| 4K0907401K 0003 Audi Q83.0 286hp | Bosch MD1CP004 | — | — | 4K0907401K 0003 | €20 · Open |
No file in this list matches. Search all original files →
About 4K0907401K
4K0907401K is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files and as the SW upgrade number on 6 files.
They were read from Bosch MD1CP004 (6 files) control units.
Our catalogue lists them for the Audi A4 (3.0 232hp), Audi A6 (3.0 286hp), Audi A7 (3.0 232hp) and Audi Q8 (3.0 286hp).
Other numbers on these files: 1 software number (10SW034635), listed on 1 of the 6 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4K0907401K
- Files
- 6
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 4
- Also written as
- 4K0 907 401 K
ECU types with 4K0907401K 1
Vehicles with 4K0907401K 4
Tuning for Bosch MD1CP004 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4K0907401K listed for?
In our catalogue: Audi A4 (3.0 232hp), Audi A6 (3.0 286hp), Audi A7 (3.0 232hp) and Audi Q8 (3.0 286hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4K0907401K?
In our catalogue 4K0907401K is on files read from Bosch MD1CP004 (6 files) control units.
There are several 4K0907401K files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.