8W0907311B original ECU files
4 original (stock) ECU files with the part number 8W0907311B — Bosch MD1CP004, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8W0907311B files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8W0907311B 0003 Audi A43.0 214hp | Bosch MD1CP004 | — | — | 8W0907311B 0003 | €20 · Open |
| 8W0907311B 0003 Audi A43.0 218hp | Bosch MD1CP004 | — | — | 8W0907311B 0003 | €20 · Open |
| 8W0907311B 0003 Audi A5 Sportback3.0 272hp | Bosch MD1CP004 | — | — | 8W0907311B 0003 | €20 · Open |
| 8W0907311B 0001 Audi A63.0 272hp | Bosch MD1CP004 | — | — | 8W0907311B 0001 | €20 · Open |
No file in this list matches. Search all original files →
About 8W0907311B
8W0907311B is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files and as the SW upgrade number on 4 files.
They were read from Bosch MD1CP004 (4 files) control units.
Our catalogue lists them for the Audi A4 (3.0 214hp, 3.0 218hp), Audi A5 Sportback (3.0 272hp) and Audi A6 (3.0 272hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8W0907311B
- Files
- 4
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 8W0 907 311 B
ECU types with 8W0907311B 1
Vehicles with 8W0907311B 3
Tuning for Bosch MD1CP004 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8W0907311B listed for?
In our catalogue: Audi A4 (3.0 214hp, 3.0 218hp), Audi A5 Sportback (3.0 272hp) and Audi A6 (3.0 272hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8W0907311B?
In our catalogue 8W0907311B is on files read from Bosch MD1CP004 (4 files) control units.
There are several 8W0907311B files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.