8V0906264C original ECU files
3 original (stock) ECU files with the part number 8V0906264C — Siemens SIMOS12.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8V0906264C files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8V0906264C 0006 Audi A31.8 16v 180hp | Siemens SIMOS12.1 | — | — | 8V0906264C 0006 | €20 · Open |
| 8V0906264C 0003 Audi A31.8 16v 180hp | Siemens SIMOS12.1 | 8V0906264C | 0003 | 8V0906264C 0003 | €20 · Open |
| CASC1CC5.DAT 10273623AA Audi A31.8 16v 180hp · CJSA | Siemens SIMOS12.1 | CASC1CC5.DAT | 10273623AA | 8V0906264C 0002 | €20 · Open |
No file in this list matches. Search all original files →
About 8V0906264C
8V0906264C is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files, as the SW upgrade number on 2 files and as the hardware number on 1 file.
They were read from Siemens SIMOS12.1 (3 files) control units.
Our catalogue lists them for the Audi A3 (1.8 16v 180hp).
Other numbers on these files: 1 software number (10273623AA), listed on 1 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8V0906264C
- Files
- 3
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 8V0 906 264 C
ECU types with 8V0906264C 1
Vehicles with 8V0906264C 1
More Siemens SIMOS12.1 numbers 11
Tuning for Siemens SIMOS12.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8V0906264C listed for?
In our catalogue: Audi A3 (1.8 16v 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8V0906264C?
In our catalogue 8V0906264C is on files read from Siemens SIMOS12.1 (3 files) control units.
There are several 8V0906264C files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.