Part number · 5 files

8K0906264A original ECU files

5 original (stock) ECU files with the part number 8K0906264A — Siemens SIMOS12.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
2models
1makes

All 8K0906264A files 5

VehicleECUHWSWCalibration / upgrade
8K0906264A 0002 Audi A41.8 170hp Siemens SIMOS12.1 — — 8K0906264A 0002 €20 · Open
8K0906264A 0004 Audi A41.8 170hp Siemens SIMOS12.1 8K0906264A 0004 8K0906264A 0004 €20 · Open
CASC18F6.DAT 10274307AA Audi A41.8 170hp · CJEBMap pack · 201 maps Siemens SIMOS12.1 CASC18F6.DAT 10274307AA 8K0906264A 0004 €20 · OpenWith maps €60
8K0906264A 0003 Audi A51.8 170hp Siemens SIMOS12.1 8K0906264A 0003 8K0906264A 0003 €20 · Open
CASC18F5.DAT 10262158AA Audi A51.8 170hp · CJEB Siemens SIMOS12.1 CASC18F5.DAT 10262158AA 8K0906264A 0003 €20 · Open

About 8K0906264A

8K0906264A is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 3 files and as the hardware number on 2 files.

They were read from Siemens SIMOS12.1 (5 files) control units.

Our catalogue lists them for the Audi A4 (1.8 170hp) and Audi A5 (1.8 170hp).

Other numbers on these files: 2 software numbers (10274307AA, 10262158AA), listed on 2 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8K0906264A
Files
5
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
8K0 906 264 A

ECU types with 8K0906264A 1

Vehicles with 8K0906264A 2

More Siemens SIMOS12.1 numbers 11

Need a modified file?

Tuning for Siemens SIMOS12.1 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8K0906264A listed for?

In our catalogue: Audi A4 (1.8 170hp) and Audi A5 (1.8 170hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8K0906264A?

In our catalogue 8K0906264A is on files read from Siemens SIMOS12.1 (5 files) control units.

There are several 8K0906264A files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.