Part number · 8 files

8V0906259 original ECU files

8 original (stock) ECU files with the part number 8V0906259 — Siemens SIMOS12.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

8files
1ECU types
2models
1makes

All 8V0906259 files 8

VehicleECUHWSWCalibration / upgrade
8V0906259 0007 Audi A31.8 16v 180hp · CJSA Siemens SIMOS12.1 — — 8V0906259 0007 €20 · Open
8V0906259 0002 Audi A32.0 280hpMap pack · 312 maps Siemens SIMOS12.1 — — 8V0906259 0002 €20 · OpenWith maps €60
8V0906259 X245 Audi A32.0 280hp Siemens SIMOS12.1 8V0906259 X245 8V0906259 X245 €20 · Open
CASC1CC5.DAT 10273592AA Audi A32.0 306hp · CJSA Siemens SIMOS12.1 CASC1CC5.DAT 10273592AA 8V0906259 0006 €20 · Open
CASC1CC5.DAT 10274180AA Audi S32.0 16v 301hp · CJXC Siemens SIMOS12.1 CASC1CC5.DAT 10274180AA 8V0906259 0006 €20 · Open
8V0906259 0008 Audi S32.0 280hpMap pack · 209 maps Siemens SIMOS12.1 — — 8V0906259 0008 €20 · OpenWith maps €60
8V0906259 0006 Audi S32.0 301hpMap pack · 277 maps Siemens SIMOS12.1 — — 8V0906259 0006 €20 · OpenWith maps €60
CASC1CB6.DAT 10263575AA Audi S32.0 301hp · CJXC Siemens SIMOS12.1 CASC1CB6.DAT 10263575AA 8V0906259 0004 €20 · Open

About 8V0906259

8V0906259 is on 8 original (stock) ECU files in our catalogue: as the calibration on 8 files, as the SW upgrade number on 5 files and as the hardware number on 1 file.

They were read from Siemens SIMOS12.1 (8 files) control units.

Our catalogue lists them for the Audi A3 (2.0 280hp, 1.8 16v 180hp, 2.0 306hp) and Audi S3 (2.0 16v 301hp, 2.0 280hp).

Other numbers on these files: 3 software numbers (10273592AA, 10274180AA, 10263575AA), listed on 3 of the 8 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8V0906259
Files
8
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
8V0 906 259

ECU types with 8V0906259 1

Vehicles with 8V0906259 2

More Siemens SIMOS12.1 numbers 11

Need a modified file?

Tuning for Siemens SIMOS12.1 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8V0906259 listed for?

In our catalogue: Audi A3 (2.0 280hp, 1.8 16v 180hp, 2.0 306hp) and Audi S3 (2.0 16v 301hp, 2.0 280hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8V0906259?

In our catalogue 8V0906259 is on files read from Siemens SIMOS12.1 (8 files) control units.

There are several 8V0906259 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.