5G0906259E original ECU files
8 original (stock) ECU files with the part number 5G0906259E — Siemens SIMOS 18.1, used in Audi, Volkswagen, Seat vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 5G0906259E files 8
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 5G0906259E 0006 Audi S12.0 231hp | Siemens SIMOS 18.1 | — | — | 5G0906259E 0006 | €20 · Open |
| 5G0906259E 0006 Audi S12.0 231hp | Siemens SIMOS 18.1 | 5G0906259E | 0006 | 5G0906259E 0006 | €20 · Open |
| 5G0906259E 0002 Audi S32.0 286hp | Siemens SIMOS 18.1 | 5G0906259E | 0002 | 5G0906259E 0002 | €20 · Open |
| 5G0906259E 0006 Audi S32.0 301hp · CJXEMap pack · 358 maps | Siemens SIMOS 18.1 | — | — | 5G0906259E 0006 | €20 · OpenWith maps €70 |
| 5G0906259E 0007 Audi S32.0 301hp · CJXE | Siemens SIMOS 18.1 | — | — | 5G0906259E 0007 | €20 · Open |
| 5G0906259E 0006 Seat Leon Cupra2.0 280hp | Siemens SIMOS 18.1 | — | — | 5G0906259E 0006 | €20 · Open |
| 5G0906259E 0003 Volkswagen Golf 72.0 300hpMap pack · 379 maps | Siemens SIMOS 18.1 | — | — | 5G0906259E 0003 | €20 · OpenWith maps €70 |
| 5G0906259E 0005 Volkswagen Golf 72.0 300hpMap pack · 400 maps | Siemens SIMOS 18.1 | — | — | 5G0906259E 0005 | €20 · OpenWith maps €70 |
No file in this list matches. Search all original files →
About 5G0906259E
5G0906259E is on 8 original (stock) ECU files in our catalogue: as the SW upgrade number on 8 files, as the calibration on 8 files and as the hardware number on 2 files.
They were read from Siemens SIMOS 18.1 (8 files) control units.
Our catalogue lists them for the Audi S3 (2.0 301hp, 2.0 286hp), Audi S1 (2.0 231hp), Volkswagen Golf 7 (2.0 300hp) and Seat Leon Cupra (2.0 280hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 5G0906259E
- Files
- 8
- Found as
- SW upgrade number, calibration and hardware number
- ECU types
- 1
- Vehicles
- 4
- Also written as
- 5G0 906 259 E
ECU types with 5G0906259E 1
Vehicles with 5G0906259E 4
More Siemens SIMOS 18.1 numbers 24
Tuning for Siemens SIMOS 18.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 5G0906259E listed for?
In our catalogue: Audi S3 (2.0 301hp, 2.0 286hp), Audi S1 (2.0 231hp), Volkswagen Golf 7 (2.0 300hp) and Seat Leon Cupra (2.0 280hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 5G0906259E?
In our catalogue 5G0906259E is on files read from Siemens SIMOS 18.1 (8 files) control units.
There are several 5G0906259E files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.