8T2907115 original ECU files
4 original (stock) ECU files with the part number 8T2907115 — Siemens SIMOS 18.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8T2907115 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8T2907115 0003 Audi A42.0 224hp | Siemens SIMOS 18.1 | — | — | 8T2907115 0003 | €20 · Open |
| 8T2907115 0005 Audi A42.0 224hp | Siemens SIMOS 18.1 | — | — | 8T2907115 0005 | €20 · Open |
| 8T2907115 0007 Audi A42.0 224hpMap pack · 371 maps | Siemens SIMOS 18.1 | — | — | 8T2907115 0007 | €20 · OpenWith maps €70 |
| 8T2907115 0005 Audi A42.0 224hp | Siemens SIMOS 18.1 | 8T2907115 | 0005 | 8T2907115 0005 | €20 · Open |
No file in this list matches. Search all original files →
About 8T2907115
8T2907115 is on 4 original (stock) ECU files in our catalogue: as the SW upgrade number on 4 files, as the calibration on 4 files and as the hardware number on 1 file.
They were read from Siemens SIMOS 18.1 (4 files) control units.
Our catalogue lists them for the Audi A4 (2.0 224hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8T2907115
- Files
- 4
- Found as
- SW upgrade number, calibration and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 8T2 907 115
ECU types with 8T2907115 1
Vehicles with 8T2907115 1
More Siemens SIMOS 18.1 numbers 24
Tuning for Siemens SIMOS 18.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8T2907115 listed for?
In our catalogue: Audi A4 (2.0 224hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8T2907115?
In our catalogue 8T2907115 is on files read from Siemens SIMOS 18.1 (4 files) control units.
There are several 8T2907115 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.