Audi S1 original ECU files
8 original (stock) ECU files for the Audi S1: 1 ECU type and 1 engine version. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
WinOLS map packs for Audi S1: 3 packs from €70
All Audi S1 files 8
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 5G0906259A 0006 Audi S12.0 231hp | Siemens SIMOS 18.1 | — | — | 5G0906259A 0006 | €20 · Open |
| 8X0906259 0002 Audi S12.0 231hpMap pack · 364 maps | Siemens SIMOS 18.1 | — | — | 8X0906259 0002 | €20 · OpenWith maps €70 |
| 5G0906259E 0006 Audi S12.0 231hp | Siemens SIMOS 18.1 | 5G0906259E | 0006 | 5G0906259E 0006 | €20 · Open |
| 5G0906259A 0006 Audi S12.0 231hp | Siemens SIMOS 18.1 | 5G0906259A | 0006 | 5G0906259A 0006 | €20 · Open |
| 8X0906259 0003 Audi S12.0 231hpMap pack · 467 maps | Siemens SIMOS 18.1 | — | — | 8X0906259 0003 | €20 · OpenWith maps €70 |
| 1K8906259 0001 Audi S12.0 231hp | Siemens SIMOS 18.1 | 1K8906259 | 0001 | 1K8906259 0001 | €20 · Open |
| 5G0906259E 0006 Audi S12.0 231hp | Siemens SIMOS 18.1 | — | — | 5G0906259E 0006 | €20 · Open |
| 8X0906259 0001 Audi S12.0 231hp · CWZA | Siemens SIMOS 18.1 | — | — | 8X0906259 0001 | €20 · Open |
No file in this list matches. Search all original files →
Audi S1: engines, ECU types and numbers
Engines with the most original files for the Audi S1, with their ECU types and some of the software numbers listed:
2.0 231hp: 8 files — Siemens SIMOS 18.1 8.
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 3
Calibration / SW upgrade · 6
ECU types in the Audi S1 1
Tuning for Audi S1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which ECU does the Audi S1 use?
In our catalogue the Audi S1 is listed with Siemens SIMOS 18.1 (8 files). Check the ECU label or your read: the hardware number decides.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.