4F1910559R original ECU files
2 original (stock) ECU files with the part number 4F1910559R — Siemens SIMOS 6.02, Siemens SIMOS6.2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4F1910559R files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 6576615290 0040 Audi A63.2 256hp | Siemens SIMOS 6.02 | 6576615290 | — | 4F1910559R 0040 | €20 · Open |
| 11S62W0P200 6576615159 CAS62P20 Audi A63.2 V6 FSI 250hp | Siemens SIMOS6.2 | 11S62W0P200 6576615159 | CAS62P20 | 4F1910559R 0020 | €20 · Open |
No file in this list matches. Search all original files →
About 4F1910559R
4F1910559R is on 2 original (stock) ECU files in our catalogue: as the SW upgrade number on 2 files and as the calibration on 2 files.
They were read from Siemens SIMOS 6.02 (1 file) and Siemens SIMOS6.2 (1 file) control units.
Our catalogue lists them for the Audi A6 (3.2 256hp, 3.2 V6 FSI 250hp).
Other numbers on these files: 2 hardware numbers (6576615290, 11S62W0P200 6576615159); 1 software number (CAS62P20), listed on 1 of the 2 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4F1910559R
- Files
- 2
- Found as
- SW upgrade number and calibration
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 4F1 910 559 R
ECU types with 4F1910559R 2
Vehicles with 4F1910559R 1
More Siemens SIMOS 6.02 numbers 6
Tuning for 4F1910559R — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4F1910559R listed for?
In our catalogue: Audi A6 (3.2 256hp, 3.2 V6 FSI 250hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4F1910559R?
In our catalogue 4F1910559R is on files read from Siemens SIMOS 6.02 (1 file) and Siemens SIMOS6.2 (1 file) control units.
There are several 4F1910559R files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.