Siemens SIMOS 6.02 original ECU files
Original (stock) files read from Siemens SIMOS 6.02 engine control units: 16 files for 1 make and 3 models. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Vehicles with a Siemens SIMOS 6.02 ECU 3
All Siemens SIMOS 6.02 files 16
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 6576615881 8E1910559E Audi A43.2 250hp | Siemens SIMOS 6.02 | 6576615881 | — | 8E1910559E 0010 | €20 · Open |
| 4F2910559B 0020 Audi A43.2 250hp | Siemens SIMOS 6.02 | — | — | 4F2910559B 0020 | €20 · Open |
| 6576615871 8E1910559 Audi A43.2 250hp | Siemens SIMOS 6.02 | 6576615871 | — | 8E1910559 0020 | €20 · Open |
| 4F1910559E 0050 Audi A43.2 250hp | Siemens SIMOS 6.02 | — | — | 4F1910559E 0050 | €20 · Open |
| 6576615290 4F1910559B Audi A63.2 231hp | Siemens SIMOS 6.02 | 6576615290 | — | 4F1910559B 0070 | €20 · Open |
| 6576615290 4F1910559B Audi A63.2 231hp | Siemens SIMOS 6.02 | 6576615290 | — | 4F1910559B 0040 | €20 · Open |
| 4F1910559B 0050 Audi A63.2 250hp | Siemens SIMOS 6.02 | — | — | 4F1910559B 0050 | €20 · Open |
| 8E1910559 0020 Audi A63.2 250hp | Siemens SIMOS 6.02 | — | — | 8E1910559 0020 | €20 · Open |
| 4F1910559S 0050 Audi A63.2 250hp | Siemens SIMOS 6.02 | — | — | 4F1910559S 0050 | €20 · Open |
| 6576615290 4F1910559R Audi A63.2 256hp | Siemens SIMOS 6.02 | 6576615290 | — | 4F1910559R 0040 | €20 · Open |
| 4F1910559D 0020 Audi A63.2 256hp | Siemens SIMOS 6.02 | — | — | 4F1910559D 0020 | €20 · Open |
| 4F1910559D 0020 Audi A63.2 256hp | Siemens SIMOS 6.02 | — | — | 4F1910559D 0020 | €20 · Open |
| Audi A63.2 V6 FSI 250hp | Siemens SIMOS 6.02 | — | — | — | €20 · Open |
| 6576615871 4E1910559F Audi A83.2 230hp | Siemens SIMOS 6.02 | 6576615871 | — | 4E1910559F 0020 | €20 · Open |
| 6576615878 CAS62P3G Audi A83.2 260hp | Siemens SIMOS 6.02 | 6576615878 | CAS62P3G | 4E1910559F 0030 | €20 · Open |
| 11S62D0MA7 6576615201 CAS62FL0 Audi A83.2 V6 FSI 260hp | Siemens SIMOS 6.02 | 11S62D0MA7 6576615201 | CAS62FL0 | 4F1910559P 0010 | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 5
Tuning for Siemens SIMOS 6.02 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Siemens SIMOS 6.02 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Siemens SIMOS 6.02?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Siemens SIMOS 6.02 (depending on the engine). Upload your read on our file service.