Part number · 2 files

4F1910559P original ECU files

2 original (stock) ECU files with the part number 4F1910559P — Siemens SIMOS 6.02, Siemens SIMOS6.2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

2files
2ECU types
2models
1makes

All 4F1910559P files 2

VehicleECUHWSWCalibration / upgrade
6576615836 0030 Audi A43.2 250hp Siemens SIMOS6.2 6576615836 — 4F1910559P 0030 €20 · Open
11S62D0MA7 6576615201 CAS62FL0 Audi A83.2 V6 FSI 260hp Siemens SIMOS 6.02 11S62D0MA7 6576615201 CAS62FL0 4F1910559P 0010 €20 · Open

About 4F1910559P

4F1910559P is on 2 original (stock) ECU files in our catalogue: as the SW upgrade number on 2 files and as the calibration on 2 files.

They were read from Siemens SIMOS6.2 (1 file) and Siemens SIMOS 6.02 (1 file) control units.

Our catalogue lists them for the Audi A4 (3.2 250hp) and Audi A8 (3.2 V6 FSI 260hp).

Other numbers on these files: 2 hardware numbers (6576615836, 11S62D0MA7 6576615201); 1 software number (CAS62FL0), listed on 1 of the 2 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
4F1910559P
Files
2
Found as
SW upgrade number and calibration
ECU types
2
Vehicles
2
Also written as
4F1 910 559 P

ECU types with 4F1910559P 2

Vehicles with 4F1910559P 2

More Siemens SIMOS 6.02 numbers 6

Need a modified file?

Tuning for 4F1910559P — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 4F1910559P listed for?

In our catalogue: Audi A4 (3.2 250hp) and Audi A8 (3.2 V6 FSI 260hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 4F1910559P?

In our catalogue 4F1910559P is on files read from Siemens SIMOS6.2 (1 file) and Siemens SIMOS 6.02 (1 file) control units.

There are several 4F1910559P files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.