03G906018FG original ECU files
4 original (stock) ECU files with the software number 03G906018FG — Siemens PPD1.2, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03G906018FG files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 2146 03G906018FG Volkswagen Golf 52.0 170hp | Siemens PPD1.2 | 2146 | 03G906018FG | 03G906018FG 2146 | €20 · Open |
| 03G906018FG 0907 Volkswagen Passat 62.0 140hpMap pack · 87 maps | Siemens PPD1.2 | — | — | 03G906018FG 0907 | €20 · OpenWith maps €60 |
| 2146 03G906018FG Volkswagen Passat 62.0 140hp · BWV | Siemens PPD1.2 | 2146 | 03G906018FG | 03G906018FG 2146 | €20 · Open |
| 2632 03G906018FG Volkswagen Passat 62.0 140hp · BWVMap pack · 87 maps | Siemens PPD1.2 | 2632 | 03G906018FG | 03G906018FG 2632 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 03G906018FG
03G906018FG is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 4 files and as the software number on 3 files.
They were read from Siemens PPD1.2 (4 files) control units.
Our catalogue lists them for the Volkswagen Passat 6 (2.0 140hp) and Volkswagen Golf 5 (2.0 170hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03G906018FG
- Files
- 4
- Found as
- calibration, SW upgrade number and software number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 03G 906 018 FG
ECU types with 03G906018FG 1
Vehicles with 03G906018FG 2
Tuning for Siemens PPD1.2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03G906018FG listed for?
In our catalogue: Volkswagen Passat 6 (2.0 140hp) and Volkswagen Golf 5 (2.0 170hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03G906018FG?
In our catalogue 03G906018FG is on files read from Siemens PPD1.2 (4 files) control units.
There are several 03G906018FG files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.