03G906018CE original ECU files
5 original (stock) ECU files with the software number 03G906018CE — Siemens PPD1.2, Siemens PPD 1.5, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 03G906018CE files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03G906018CE 9384 Volkswagen Passat 62.0 140hp | Siemens PPD1.2 | — | — | 03G906018CE 9384 | €20 · Open |
| 9384 03G906018CE Volkswagen Passat 62.0 140hpMap pack · 105 maps | Siemens PPD1.2 | 9384 | 03G906018CE | 03G906018CE 9384 | €20 · OpenWith maps €60 |
| 9707 03G906018CE Volkswagen Passat 62.0 140hpMap pack · 97 maps | Siemens PPD1.2 | 9707 | 03G906018CE | 03G906018CE 9707 | €20 · OpenWith maps €60 |
| 03G906018CE 9707 Volkswagen Passat 62.0 170hpMap pack · 87 maps | Siemens PPD1.2 | — | — | 03G906018CE 9707 | €20 · OpenWith maps €60 |
| 9707 03G906018CE Volkswagen Passat 62.0 170hp | Siemens PPD 1.5 | 9707 | 03G906018CE | 03G906018CE 9707 | €20 · Open |
No file in this list matches. Search all original files →
About 03G906018CE
03G906018CE is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 5 files and as the software number on 3 files.
They were read from Siemens PPD1.2 (4 files) and Siemens PPD 1.5 (1 file) control units.
Our catalogue lists them for the Volkswagen Passat 6 (2.0 140hp, 2.0 170hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 03G906018CE
- Files
- 5
- Found as
- calibration, SW upgrade number and software number
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 03G 906 018 CE
ECU types with 03G906018CE 2
Vehicles with 03G906018CE 1
Tuning for 03G906018CE — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 03G906018CE listed for?
In our catalogue: Volkswagen Passat 6 (2.0 140hp, 2.0 170hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 03G906018CE?
In our catalogue 03G906018CE is on files read from Siemens PPD1.2 (4 files) and Siemens PPD 1.5 (1 file) control units.
There are several 03G906018CE files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.