Siemens SIMOS8.6 original ECU files
Original (stock) files read from Siemens SIMOS8.6 engine control units: 12 files for 1 make and 2 models. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Vehicles with a Siemens SIMOS8.6 ECU 2
All Siemens SIMOS8.6 files 12
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G0907552K 0002 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552K 0002 | €20 · Open |
| 4G0907473A 0003 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907473A 0003 | €20 · Open |
| 650S865535 S8600G2000000111 Audi A62.5 190hp | Siemens SIMOS8.6 | 650S865535 | S8600G2000000111 | 4G0907473A 0002 | €20 · Open |
| 650S865535 S8600G2000000111 Audi A62.5 190hpMap pack · 151 maps | Siemens SIMOS8.6 | 650S865535 | S8600G2000000111 | 4G0907552H 0003 | €20 · OpenWith maps €60 |
| 4G0907552L 0002 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552L 0002 | €20 · Open |
| 650S865535 S8600G2000000111 Audi A62.5 190hpMap pack · 57 maps | Siemens SIMOS8.6 | 650S865535 | S8600G2000000111 | 4G0907552F 0003 | €20 · OpenWith maps €60 |
| 4G0907552F 0005 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552F 0005 | €20 · Open |
| 4G0907473B 0002 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907473B 0002 | €20 · Open |
| 4G0907552F 0003 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552F 0003 | €20 · Open |
| 4G0907552H 0001 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552H 0001 | €20 · Open |
| 4G0907552D 0004 Audi A62.8 220hp | Siemens SIMOS8.6 | — | — | 4G0907552D 0004 | €20 · Open |
| Audi Q52.5 190hp | Siemens SIMOS8.6 | — | — | — | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 1
Software (SW) · 1
Tuning for Siemens SIMOS8.6 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Siemens SIMOS8.6 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Siemens SIMOS8.6?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Siemens SIMOS8.6 (depending on the engine). Upload your read on our file service.