MB Actros ACM-12.8TDI — Siemens/Continental ACM2 — 0024482054001 0084486454001 0184487254001 OM471
ECU tuning and emission-solution file for this exact calibration · 510hp · 2018
About this file
This page covers one exact calibration: Siemens/Continental ACM2 with software 0024482054001 0084486454001 0184487254001 OM471, as indexed on the MB Actros ACM-12.8TDI. Work is done on your own original read — we do not send a generic file for the controller family, because two vehicles sharing a controller can carry different maps, limiters and diagnostics.
Send the file exactly as your tool saved it and tell us which tool produced it. You get the modified file back in the same format, with the checksum corrected, ready to write. Turnaround is 1–3 hours for the solutions listed as available below.
If your readout shows a different software number from the same family, use the version list at the bottom of the page — every calibration we have indexed has its own page.
Everything on this page is reference information. Not finding your exact version here does not mean we cannot do it — a solution can be developed for any calibration. Create an order on the file service and send us the original read.
What can be done on this ECU
These are the services offered for the Siemens/Continental ACM2 and their list prices. Ordering several in one file is cheaper — the calculator below applies the bundle rules.
| Service | Price | Notes |
|---|---|---|
| DPF/FAP Delete | 150 € | To delete the DPF, the AdBlue/SCR system must also be removed - please select the SCR/AdBlue OFF option as well if needed. You can perform the coding yourself via Xentry (instructions will be provided after placing the order) - in this case reading the ACM (AdBlue) module is not required. If you cannot perform the coding, you must read and attach files from both control units: ACM ECU (AdBlue) and MCM ECU (engine). You must also physically disconnect the DPF pressure sensor and the exhaust temperature sensors. |
| EGR/AGR Removal | 95 € | |
| SCR/AdBlue OFF | 160 € | If you want to remove only the AdBlue system and keep the DPF filter active, you must read and attach files from both control units: ACM ECU (AdBlue) and MCM ECU (engine). If you also want to remove the DPF, you have 2 options: disconnect the ACM plug (no reading needed) and perform the coding yourself via Xentry (instructions provided after placing the order); or, if you cannot perform the coding, attach reads from both control units - ACM and MCM. You must also physically disconnect the AdBlue injector plug, the AdBlue pump and the NOx sensor. |
| Stage 1 tuning file | 160 € | Please visit our website tuning catalog to see final results after Stage 1: https://auto-remap.com/catalog/trucks |
| Throttle Valve TVA Disable | 95 € | |
| Swirl valve/Flaps OFF | 95 € | |
| DTC's selectivity OFF | 70 € | |
| Checksumm correction | 50 € | Checksumm correction: select this option ONLY if you really need checksumm and your device not do it automatically, because this option cost additional money! |
| Back to ORIGINAL file (restore file to original) | 30 € | Please select this option only if you really need to recovery all changes to original. In case if your attached file after our checking content original changes, order will be completed and the cost of the checking will be deducted from your account!!! Because we are loosing time on checking and comparing it with original database= this is same like price return to original. |
Prices on this page are for information. The exact price is confirmed inside the order on the file service, after we see your file.
Price calculator
Ordering runs through the file service and needs an account. Quote this software number in the order: 0024482054001 0084486454001 0184487254001 OM471
Prices on this page are for information. The exact price is confirmed inside the order on the file service, after we see your file.
How it works
- Read the ECU with your tool and save the original file.
- Find your software number on this page and check the price in the calculator above. Nothing is uploaded here and no account is needed at this step.
- Register on the file service and open New order.
- Upload the original file there and pick the same solutions you priced on this page.
- We modify the file and correct the checksum.
- Download the finished file on the order page within 1–3 hours, then write it back and clear the codes.
Vehicles running this calibration
Identifiers on this file
The source data lists these numbers as a single field without marking which is software and which is hardware. The count below shows how often each number appears across the whole database: a number unique to this file is the calibration itself, a number shared by hundreds of files sits at hardware or bootloader level.
| 0024482054001 | shared across 26 files — hardware or bootloader level |
|---|---|
| 0084486454001 | shared across 7 files — hardware or bootloader level |
| 0184487254001 | shared with 3 other files |
| OM471 | shared across 53 files — hardware or bootloader level |
Specifications
| Make | MB |
|---|---|
| Model | Actros, Actros-1843 |
| Engine | ACM-12.8TDI |
| Power | 510hp |
| ECU | Siemens/Continental ACM2 |
| SW / HW identifiers | 0024482054001 0084486454001 0184487254001 OM471 |
| Model years | 2014–2018 |
| Vehicles indexed | 2 |
| Accepted formats | .bin, .hpt, .ctz, .ols and other tool outputs — returned in the same format |
| Turnaround | 1–3 hours |
Other software versions on Siemens/Continental ACM2
Reading this platform: ACM and MCM
Switching AdBlue off on this platform always needs both controllers read — the ACM and the MCM.
For a DPF + AdBlue delete there are two routes. Read the MCM and unplug the connector from the ACM: the job works, but the vehicle then needs Xentry coding afterwards, and we send you the instructions for it.
Or read both the MCM and the ACM. No coding is needed afterwards — this is the route to take if Xentry is not available to you.
Related reading
What you see here is only a part of the software versions we have already worked on. Any modification can be made for any version, make or model, including ones not in this list — find your make and controller on the site, and if your version is not there, send us the original file. We check it and add it to the list shortly.
FAQ
- My software number is 0184487254001 — is this the right page?
- Yes. This page is built around the identifier set 0024482054001 0084486454001 0184487254001 OM471 on the Siemens/Continental ACM2. If your readout shows a different number from the same family, open it from the version list on this page.
- Which file do you need from me?
- The original read from the ECU, in whatever format your tool produced. Tell us the tool so the file comes back in a format you can write.
- How long does it take?
- 1–3 hours for the solutions marked available on this page. Anything marked on request is answered after we look at the file.
- Is the checksum corrected?
- Yes. The returned file is ready to write back.
- Can several solutions go into one file?
- Yes, and that is the cheaper route — the calculator applies the bundle pricing automatically as you tick them.