P300220P.HEXP1100CR original ECU files
4 original (stock) ECU files with the software number P300220P.HEXP1100CR — Bosch EDC7C1, used in Volvo Penta vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All P300220P.HEXP1100CR files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0281Y03220 Volvo Penta D43.6 225hp | Bosch EDC7C1 | 0281Y03220 | P300220P.HEXP1100CR | V2.2.0 | €20 · Open |
| 0281020010 V2.4.0 Volvo Penta D43.6 300hp | Bosch EDC7C1 | 0281020010 | P300220P.HEXP1100CR | V2.4.0 | €20 · Open |
| 0281020010 Volvo Penta D65.5 350hp | Bosch EDC7C1 | 0281020010 | P300220P.HEXP1100CR | V2.2.0 | €20 · Open |
| 0281Y0326R Volvo Penta D65.5 435hp | Bosch EDC7C1 | 0281Y0326R | P300220P.HEXP1100CR | V2.2.0 | €20 · Open |
No file in this list matches. Search all original files →
About P300220P.HEXP1100CR
P300220P.HEXP1100CR is on 4 original (stock) ECU files in our catalogue, always as the software number.
They were read from Bosch EDC7C1 (4 files) control units.
Our catalogue lists them for the Volvo Penta D4 (3.6 225hp, 3.6 300hp) and Volvo Penta D6 (5.5 350hp, 5.5 435hp).
Other numbers on these files: 3 hardware numbers (0281020010, 0281Y03220, 0281Y0326R); 3 calibration / SW upgrade numbers (V2.2.0, V2.4.0, EDC7C1__52).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- P300220P.HEXP1100CR
- Files
- 4
- Found as
- software number
- ECU types
- 1
- Vehicles
- 2
ECU types with P300220P.HEXP1100CR 1
Vehicles with P300220P.HEXP1100CR 2
Tuning for Bosch EDC7C1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is P300220P.HEXP1100CR listed for?
In our catalogue: Volvo Penta D4 (3.6 225hp, 3.6 300hp) and Volvo Penta D6 (5.5 350hp, 5.5 435hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has P300220P.HEXP1100CR?
In our catalogue P300220P.HEXP1100CR is on files read from Bosch EDC7C1 (4 files) control units.
There are several P300220P.HEXP1100CR files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.