0281020032 original ECU files
10 original (stock) ECU files with the hardware number 0281020032 — Bosch EDC7C1, Bosch EDC16.A0, used in Volkswagen Truck, Volvo Trucks, Volvo Penta, Agrale vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0281020032 files 10
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 1037372081 Agrale 8500 E-Tronic4.8 146hp | Bosch EDC7C1 | 0281020032 | 1037372081 | — | €20 · Open |
| Volkswagen Truck 9.1503.9 TD 190hp | Bosch EDC16.A0 | 0281020032 | — | — | €20 · Open |
| 1037371383 Volkswagen Truck BUS150hp | Bosch EDC7C1 | 0281020032 | 1037371383 | — | €20 · Open |
| Volkswagen Truck BUS210hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
| Volkswagen Truck Constellation260hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
| Volvo Penta D65.5 435hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
| Volvo Penta D65.5 435hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
| Volvo Trucks VM310hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
| Volvo Trucks VM310hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
| Volvo Trucks VM7.2 310hp | Bosch EDC7C1 | 0281020032 | — | — | €20 · Open |
No file in this list matches. Search all original files →
About 0281020032
0281020032 is on 10 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Bosch EDC7C1 (9 files) and Bosch EDC16.A0 (1 file) control units.
Our catalogue lists them for the Volvo Trucks VM (310hp, 7.2 310hp), Volkswagen Truck BUS (150hp, 210hp), Volvo Penta D6 (5.5 435hp), Agrale 8500 E-Tronic (4.8 146hp), Volkswagen Truck 9.150 (3.9 TD 190hp) and Volkswagen Truck Constellation (260hp).
Other numbers on these files: 2 software numbers (1037372081, 1037371383), listed on 2 of the 10 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 4 of these files have the same numbers, ECU, vehicle and engine as another file in this list.
- Number
- 0281020032
- Files
- 10
- Found as
- hardware number
- ECU types
- 2
- Vehicles
- 6
- Also written as
- 0 281 020 032
ECU types with 0281020032 2
Vehicles with 0281020032 6
Tuning for 0281020032 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0281020032 listed for?
In our catalogue: Volvo Trucks VM (310hp, 7.2 310hp), Volkswagen Truck BUS (150hp, 210hp), Volvo Penta D6 (5.5 435hp), Agrale 8500 E-Tronic (4.8 146hp), Volkswagen Truck 9.150 (3.9 TD 190hp) and Volkswagen Truck Constellation (260hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0281020032?
In our catalogue 0281020032 is on files read from Bosch EDC7C1 (9 files) and Bosch EDC16.A0 (1 file) control units.
There are several 0281020032 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.