B1E-UGD90U original ECU files
3 original (stock) ECU files with the hardware number B1E-UGD90U — Delphi DCM3.7, used in Chevrolet vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All B1E-UGD90U files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 00003P906021B Chevrolet Captiva2.2 184hp · Z22 | Delphi DCM3.7 | B1E-UGD90U | 00003P906021B | DELPH0100 | €20 · Open |
| 01806886AA Chevrolet Captiva2.2 184hp · Z22 | Delphi DCM3.7 | B1E-UGD90U | 01806886AA | 0180718FAA | €20 · Open |
| 01806886AA 0180718FAA Chevrolet Captiva2.2 184hp · Z22 | Delphi DCM3.7 | B1E-UGD90U | 01806886AA | 0180718FAA | €20 · Open |
No file in this list matches. Search all original files →
About B1E-UGD90U
B1E-UGD90U is on 3 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Delphi DCM3.7 (3 files) control units.
Our catalogue lists them for the Chevrolet Captiva (2.2 184hp).
Other numbers on these files: 2 software numbers (01806886AA, 00003P906021B); 3 calibration / SW upgrade numbers (0180718FAA, DELPH0100, 01807BCDAA).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- B1E-UGD90U
- Files
- 3
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- B1EUGD90U · B1E UGD90U
ECU types with B1E-UGD90U 1
Vehicles with B1E-UGD90U 1
Tuning for Delphi DCM3.7 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is B1E-UGD90U listed for?
In our catalogue: Chevrolet Captiva (2.2 184hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has B1E-UGD90U?
In our catalogue B1E-UGD90U is on files read from Delphi DCM3.7 (3 files) control units.
There are several B1E-UGD90U files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.