28283968 original ECU files
7 original (stock) ECU files with the hardware number 28283968 — Delphi DCM3.7, Siemens SIMOS 18.4, used in Ssangyong vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 28283968 files 7
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| UCA40A00 UCA40A193 D20DTF C200MT Ssangyong Actyon2.2 150hpMap pack · 63 maps | Delphi DCM3.7 | 28283968 | UCA40A00 | UCA40A193 D20DTF C200MT | €20 · OpenWith maps €60 |
| 8W0906259L 0003 Ssangyong Korando2.2 150hp | Siemens SIMOS 18.4 | 28283968 | — | 8W0906259L 0003 | €20 · Open |
| UCA40A00 UCA40A193 D20DTF C200AT Ssangyong Korando2.2 150hp | Delphi DCM3.7 | 28283968 | UCA40A00 | UCA40A193 D20DTF C200AT | €20 · Open |
| UCA40A00 Ssangyong Korando2.2 150hp | Delphi DCM3.7 | 28283968 | UCA40A00 | UCA40A194 D20DTF C200AT | €20 · Open |
| UCA40B00 Ssangyong Korando2.2 150hp | Delphi DCM3.7 | 28283968 | UCA40B00 | UCA40B197 D20DTF C200MT | €20 · Open |
| UCA40B00 UCA40B199 D20DTF C200MT Ssangyong Korando2.2 150hpMap pack · 63 maps | Delphi DCM3.7 | 28283968 | UCA40B00 | UCA40B199 D20DTF C200MT | €20 · OpenWith maps €60 |
| UCD40F00 Ssangyong Korando2.2 150hp | Delphi DCM3.7 | 28283968 | UCD40F00 | UCD40F210 D20DTF C202MT | €20 · Open |
No file in this list matches. Search all original files →
About 28283968
28283968 is on 7 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Delphi DCM3.7 (6 files) and Siemens SIMOS 18.4 (1 file) control units.
Our catalogue lists them for the Ssangyong Korando (2.2 150hp) and Ssangyong Actyon (2.2 150hp).
Other numbers on these files: 3 software numbers (UCA40A00, UCA40B00, UCD40F00), listed on 6 of the 7 files; 7 calibration / SW upgrade numbers (UCA40A193_D20DTF_C200MT, 8W0906259L_0003, UCA40A193_D20DTF_C200AT, UCA40A194_D20DTF_C200AT, …).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 28283968
- Files
- 7
- Found as
- hardware number
- ECU types
- 2
- Vehicles
- 2
ECU types with 28283968 2
Vehicles with 28283968 2
Tuning for 28283968 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 28283968 listed for?
In our catalogue: Ssangyong Korando (2.2 150hp) and Ssangyong Actyon (2.2 150hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 28283968?
In our catalogue 28283968 is on files read from Delphi DCM3.7 (6 files) and Siemens SIMOS 18.4 (1 file) control units.
There are several 28283968 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.