9X23-14C568-DA original ECU files
4 original (stock) ECU files with the hardware number 9X23-14C568-DA — Denso MB279700, used in Jaguar vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 9X23-14C568-DA files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| X23-14C570-DBB 9X23-14C570-DBB Jaguar XF3.0 238hp · AJ30 | Denso MB279700 | 9X23-14C568-DA | X23-14C570-DBB | 9X23-14C570-DBB | €20 · Open |
| W93-14C570-DBC Jaguar XJ3.0 238hp · AJ30 | Denso MB279700 | 9X23-14C568-DA | W93-14C570-DBC | BW93-14C570-DBC | €20 · Open |
| W93-14C570-DBD Jaguar XJ3.0 238hp | Denso MB279700 | 9X23-14C568-DA | W93-14C570-DBD | W93-14C570-DBD | €20 · Open |
| X23-14C570-DBB Jaguar XJ3.0 238hp | Denso MB279700 | 9X23-14C568-DA | X23-14C570-DBB | X23-14C570-DBB | €20 · Open |
No file in this list matches. Search all original files →
About 9X23-14C568-DA
9X23-14C568-DA is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Denso MB279700 (4 files) control units.
Our catalogue lists them for the Jaguar XJ (3.0 238hp) and Jaguar XF (3.0 238hp).
Other numbers on these files: 3 software numbers (X23-14C570-DBB, W93-14C570-DBC, W93-14C570-DBD); 2 calibration / SW upgrade numbers (9X23-14C570-DBB, BW93-14C570-DBC), listed on 2 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 9X23-14C568-DA
- Files
- 4
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 9X2314C568DA · 9X23 14C568 DA
ECU types with 9X23-14C568-DA 1
Vehicles with 9X23-14C568-DA 2
Tuning for Denso MB279700 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 9X23-14C568-DA listed for?
In our catalogue: Jaguar XJ (3.0 238hp) and Jaguar XF (3.0 238hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 9X23-14C568-DA?
In our catalogue 9X23-14C568-DA is on files read from Denso MB279700 (4 files) control units.
There are several 9X23-14C568-DA files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.