Hardware number · 4 files

95B906259G original ECU files

4 original (stock) ECU files with the hardware number 95B906259G — Siemens SIMOS 18.10, used in Porsche, Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

4files
1ECU types
2models
2makes

All 95B906259G files 4

VehicleECUHWSWCalibration / upgrade
95B906259G 0007 Audi S32.0 310hp · CJXE Siemens SIMOS 18.10 95B906259G 0007 95B906259G 0007 €20 · Open
95B906259G 0006 Porsche Macan2.0 245hp Siemens SIMOS 18.10 — — 95B906259G 0006 €20 · Open
95B906259G 0009 Porsche Macan2.0 245hp Siemens SIMOS 18.10 — — 95B906259G 0009 €20 · Open
95B906259G 0010 Porsche Macan2.0 245hp Siemens SIMOS 18.10 95B906259G 0010 95B906259G 0010 €20 · Open

About 95B906259G

95B906259G is on 4 original (stock) ECU files in our catalogue: as the SW upgrade number on 4 files, as the calibration on 4 files and as the hardware number on 2 files.

They were read from Siemens SIMOS 18.10 (4 files) control units.

Our catalogue lists them for the Porsche Macan (2.0 245hp) and Audi S3 (2.0 310hp).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
95B906259G
Files
4
Found as
SW upgrade number, calibration and hardware number
ECU types
1
Vehicles
2
Also written as
95B 906 259 G

ECU types with 95B906259G 1

Vehicles with 95B906259G 2

More Siemens SIMOS 18.10 numbers 23

Need a modified file?

Tuning for Siemens SIMOS 18.10 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 95B906259G listed for?

In our catalogue: Porsche Macan (2.0 245hp) and Audi S3 (2.0 310hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 95B906259G?

In our catalogue 95B906259G is on files read from Siemens SIMOS 18.10 (4 files) control units.

There are several 95B906259G files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.