8E0909518AK original ECU files
6 original (stock) ECU files with the part number 8E0909518AK — Bosch ME7.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8E0909518AK files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8E0909518AK 0003 Audi A31.8 20V TURBO 180hp | Bosch ME7.5 | — | — | 8E0909518AK 0003 | €20 · Open |
| 0261208230 1037371156 Audi A41.8 20V 163hp | Bosch ME7.5 | 0261208230 | 1037371156 | 8E0909518AK 0005 | €20 · Open |
| 0261208230 1037371156 Audi A41.8 20V 163hp · BFB | Bosch ME7.5 | 0261208230 | 1037371156 | 8E0909518AK 0005 | €20 · Open |
| 0261208230 1037371156 Audi A41.8 20V TURBO 150hp | Bosch ME7.5 | 0261208230 | 1037371156 | 8E0909518AK 0005 | €20 · Open |
| 0261208230 1037368072 Audi A41.8 20V TURBO 163hp | Bosch ME7.5 | 0261208230 | 1037368072 | 8E0909518AK 0003 | €20 · Open |
| 0261208230 1037369307 Audi A41.8 20V TURBO 163hpMap pack · 68 maps | Bosch ME7.5 | 0261208230 | 1037369307 | 8E0909518AK 0004 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 8E0909518AK
8E0909518AK is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files and as the SW upgrade number on 4 files.
They were read from Bosch ME7.5 (6 files) control units.
Our catalogue lists them for the Audi A4 (1.8 20V Turbo 163hp, 1.8 20V Turbo 150hp) and Audi A3 (1.8 20V Turbo 180hp).
Other numbers on these files: 1 hardware number (0261208230), listed on 5 of the 6 files; 3 software numbers (1037371156, 1037368072, 1037369307), listed on 5 of the 6 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 2 of these files have the same numbers, ECU, vehicle and engine as another file in this list.
- Number
- 8E0909518AK
- Files
- 6
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 8E0 909 518 AK
ECU types with 8E0909518AK 1
Vehicles with 8E0909518AK 2
Tuning for Bosch ME7.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8E0909518AK listed for?
In our catalogue: Audi A4 (1.8 20V Turbo 163hp, 1.8 20V Turbo 150hp) and Audi A3 (1.8 20V Turbo 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8E0909518AK?
In our catalogue 8E0909518AK is on files read from Bosch ME7.5 (6 files) control units.
There are several 8E0909518AK files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.