4Z7907401B original ECU files
4 original (stock) ECU files with the hardware number 4Z7907401B — Bosch EDC15V, Bosch EDC15VM, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4Z7907401B files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4Z7907401B 07 Audi A62.5 180hp | Bosch EDC15V | 4Z7907401B | 07 | 4Z7907401B 07 | €20 · Open |
| 4Z7907401B 09 Audi A62.5 180hp | Bosch EDC15V | 4Z7907401B | 09 | 4Z7907401B 09 | €20 · Open |
| 4Z7907401B 06 Audi A62.5 TDI V6 180hp | Bosch EDC15V | 4Z7907401B | 06 | 4Z7907401B 06 | €20 · Open |
| 0281010897 1037362747 Audi A62.5 TDI V6 180hp | Bosch EDC15VM | 0281010897 | 1037362747 | 4Z7907401B D06 | €20 · Open |
No file in this list matches. Search all original files →
About 4Z7907401B
4Z7907401B is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files and as the hardware number on 3 files.
They were read from Bosch EDC15V (3 files) and Bosch EDC15VM (1 file) control units.
Our catalogue lists them for the Audi A6 (2.5 TDI V6 180hp).
Other numbers on these files: 1 hardware number (0281010897), listed on 1 of the 4 files; 1 software number (1037362747), listed on 1 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4Z7907401B
- Files
- 4
- Found as
- calibration and hardware number
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 4Z7 907 401 B
ECU types with 4Z7907401B 2
Vehicles with 4Z7907401B 1
Tuning for 4Z7907401B — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4Z7907401B listed for?
In our catalogue: Audi A6 (2.5 TDI V6 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4Z7907401B?
In our catalogue 4Z7907401B is on files read from Bosch EDC15V (3 files) and Bosch EDC15VM (1 file) control units.
There are several 4Z7907401B files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.