4D2907401 original ECU files
3 original (stock) ECU files with the hardware number 4D2907401 — Bosch EDC15V, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4D2907401 files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4D2907401 02 Audi A62.5 TDI V6 180hpMap pack · 71 maps | Bosch EDC15V | 4D2907401 | 02 | 4D2907401 02 | €20 · OpenWith maps €60 |
| 4D2907401 01 Audi A82.5 TDI V6 180hpMap pack · 48 maps | Bosch EDC15V | 4D2907401 | 01 | 4D2907401 01 | €20 · OpenWith maps €60 |
| 4D2907401 02 Audi A82.5 TDI V6 180hpMap pack · 71 maps | Bosch EDC15V | 4D2907401 | 02 | 4D2907401 02 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 4D2907401
4D2907401 is on 3 original (stock) ECU files in our catalogue: as the hardware number on 3 files and as the calibration on 3 files.
They were read from Bosch EDC15V (3 files) control units.
Our catalogue lists them for the Audi A8 (2.5 TDI V6 180hp) and Audi A6 (2.5 TDI V6 180hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4D2907401
- Files
- 3
- Found as
- hardware number and calibration
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 4D2 907 401
ECU types with 4D2907401 1
Vehicles with 4D2907401 2
More Bosch EDC15V numbers 24
Tuning for Bosch EDC15V — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4D2907401 listed for?
In our catalogue: Audi A8 (2.5 TDI V6 180hp) and Audi A6 (2.5 TDI V6 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4D2907401?
In our catalogue 4D2907401 is on files read from Bosch EDC15V (3 files) control units.
There are several 4D2907401 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.