4G0907552F original ECU files
3 original (stock) ECU files with the part number 4G0907552F — Siemens SIMOS8.6, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4G0907552F files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G0907552F 0003 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552F 0003 | €20 · Open |
| 4G0907552F 0005 Audi A62.5 190hp | Siemens SIMOS8.6 | — | — | 4G0907552F 0005 | €20 · Open |
| 650S865535 S8600G2000000111 Audi A62.5 190hpMap pack · 57 maps | Siemens SIMOS8.6 | 650S865535 | S8600G2000000111 | 4G0907552F 0003 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 4G0907552F
4G0907552F is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the SW upgrade number on 3 files.
They were read from Siemens SIMOS8.6 (3 files) control units.
Our catalogue lists them for the Audi A6 (2.5 190hp).
Other numbers on these files: 1 hardware number (650S865535), listed on 1 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4G0907552F
- Files
- 3
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 4G0 907 552 F
ECU types with 4G0907552F 1
Vehicles with 4G0907552F 1
Tuning for Siemens SIMOS8.6 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4G0907552F listed for?
In our catalogue: Audi A6 (2.5 190hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4G0907552F?
In our catalogue 4G0907552F is on files read from Siemens SIMOS8.6 (3 files) control units.
There are several 4G0907552F files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.