Part number · 3 files

4E0910552 original ECU files

3 original (stock) ECU files with the part number 4E0910552 — Bosch MED9.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

3files
1ECU types
2models
1makes

All 4E0910552 files 3

VehicleECUHWSWCalibration / upgrade
0261S02215 1037387929 Audi S55.2 360hp · CAUB Bosch MED9.1 0261S02215 1037387929 4E0910552 0060 €20 · Open
0261S02215 1037387514 Audi S85.2 450hp Bosch MED9.1 0261S02215 1037387514 4E0910552 0050 €20 · Open
4E0910552 0040 Audi S85.2 V10 FSI 450hp Bosch MED9.1 4E0910552 0040 4E0910552 0040 €20 · Open

About 4E0910552

4E0910552 is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the hardware number on 1 file.

They were read from Bosch MED9.1 (3 files) control units.

Our catalogue lists them for the Audi S8 (5.2 V10 FSI 450hp) and Audi S5 (5.2 360hp).

Other numbers on these files: 1 hardware number (0261S02215), listed on 2 of the 3 files; 2 software numbers (1037387929, 1037387514), listed on 2 of the 3 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
4E0910552
Files
3
Found as
calibration and hardware number
ECU types
1
Vehicles
2
Also written as
4E0 910 552

ECU types with 4E0910552 1

Vehicles with 4E0910552 2

More Bosch MED9.1 numbers 24

Need a modified file?

Tuning for Bosch MED9.1 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 4E0910552 listed for?

In our catalogue: Audi S8 (5.2 V10 FSI 450hp) and Audi S5 (5.2 360hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 4E0910552?

In our catalogue 4E0910552 is on files read from Bosch MED9.1 (3 files) control units.

There are several 4E0910552 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.