391K0-2FDB0 original ECU files
3 original (stock) ECU files with the hardware number 391K0-2FDB0 — Bosch EDC17C57, used in Hyundai, KIA vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 391K0-2FDB0 files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 71TLC4NAIDDIR001 Hyundai Tucson2.0 136hp | Bosch EDC17C57 | 391K0-2FDB0 | 71TLC4NAIDDIR001 | 71TLC4NAIDDIR001 0105 | €20 · Open |
| 71TLC4NAIDDIR003 Hyundai Tucson2.0 136hp | Bosch EDC17C57 | 391K0-2FDB0 | 71TLC4NAIDDIR003 | — | €20 · Open |
| 71TLC4NAIDDIR002 KIA Sedona2.0 136hp | Bosch EDC17C57 | 391K0-2FDB0 | 71TLC4NAIDDIR002 | — | €20 · Open |
No file in this list matches. Search all original files →
About 391K0-2FDB0
391K0-2FDB0 is on 3 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Bosch EDC17C57 (3 files) control units.
Our catalogue lists them for the Hyundai Tucson (2.0 136hp) and KIA Sedona (2.0 136hp).
Other numbers on these files: 3 software numbers (71TLC4NAIDDIR001, 71TLC4NAIDDIR003, 71TLC4NAIDDIR002); 1 calibration / SW upgrade number (71TLC4NAIDDIR001_0105), listed on 1 of the 3 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 391K0-2FDB0
- Files
- 3
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 391K02FDB0 · 391K0 2FDB0
ECU types with 391K0-2FDB0 1
Vehicles with 391K0-2FDB0 2
Tuning for Bosch EDC17C57 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 391K0-2FDB0 listed for?
In our catalogue: Hyundai Tucson (2.0 136hp) and KIA Sedona (2.0 136hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 391K0-2FDB0?
In our catalogue 391K0-2FDB0 is on files read from Bosch EDC17C57 (3 files) control units.
There are several 391K0-2FDB0 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.